BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.002777BTC
มีสินค้า
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR5 5600MHz CL46 1.1V 288-Pin UDIMM for ASUS ProArt Z790-CREATOR
A 32 GB DDR5 kit of two 16 GB UDIMM modules running at 5600 MHz with CL46 latency at 1.1 V, validated for the ASUS ProArt Z790-CREATOR
- Capacity32GB (2 x 16GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit expands workstation capacity for heavy multitasking
- 5600 MHz DDR5 speed feeds data to CPU without bottlenecks
- CL46 latency keeps response tight under sustained loads
- 1 V operation reduces power draw and heat output
- Validated for ASUS ProArt Z790-CREATOR motherboard compatibility
Tailored DDR5 kit for ASUS ProArt Z790-CREATOR
This 32 GB kit contains two 16 GB DDR5 modules rated at 5600 MHz with CL46 latency. The 1.1 V unbuffered UDIMMs are validated for the ASUS ProArt Z790-CREATOR WiFi motherboard. Builders expanding a workstation for content creation or heavy multitasking will match the board's supported specification exactly.
No heat spreader keeps modules low-profile
The sticks ship without a metal heat spreader, reducing overall height for tight CPU cooler clearances. Standard JEDEC timings at 1.1 V mean the memory runs at rated speed without manual voltage changes. The package includes only the two UDIMMs; no extra software, cables or documentation are bundled.
Straightforward UDIMM installation
Align the 288-pin modules with the motherboard slots and press until the retention clips click. The board defaults to the correct 5600 MHz frequency, so no BIOS tuning is usually required. Problems arise if slots are populated in the wrong order or if a single module is installed instead of the matched pair.
จุดเด่น
- 32 GB kit expands workstation capacity for heavy multitasking
- 5600 MHz DDR5 speed feeds data to CPU without bottlenecks
- CL46 latency keeps response tight under sustained loads
- 1 V operation reduces power draw and heat output
- Validated for ASUS ProArt Z790-CREATOR motherboard compatibility
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASUS |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2 x 16GB) DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
Will the 1Rx8 DDR5 modules need replacement if I later want ECC or higher density?
These are non-ECC unbuffered 1Rx8 modules; if your workload later requires ECC or dual-rank density you would need a different kit.
What limit appears first when the kit runs at 5600 MHz CL46 continuously?
The CAS latency of CL46 at 5600 MHz sets the timing ceiling; sustained loads will hit that latency boundary before voltage or thermal limits.
How much heat and power should I expect from the 1.1 V DDR5 sticks under all-day load?
Operating at 1.1 V without a heat spreader, the modules draw minimal power and run cool enough for typical desktop airflow.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
