NEMIX RAM
NEMIX RAM 32GB DDR4 2666 CL19 ECC RDIMM Synology SA3400 memory upgrade
32 GB DDR4 2666 ECC registered RDIMM built for Synology SA3400 NAS expansion
- Capacity32GB
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB module doubles Synology SA3400 memory capacity
- ECC registered design protects data integrity under load
- DDR4 2666 CL19 timing matches factory specifications
- 2 V operation keeps power draw low
- 288-pin RDIMM form factor fits the NAS slot
Synology SA3400 ECC RDIMM Upgrade
This NEMIX RAM module adds 32GB of DDR4 2666 ECC registered memory to a Synology SA3400 NAS. It arrives as a single 288-pin RDIMM rated at 1.2V with CL19 latency and a 2Rx4 rank configuration. The part number MR21300-324K1 confirms factory validation for the target platform.
IT Teams Maintaining SA3400 Units
The module suits administrators who need to expand the memory of a Synology SA3400 for virtualisation, file services or database workloads that benefit from error-correcting registered DIMMs. It is not intended for consumer desktops, laptops or unbuffered UDIMM slots, and it cannot be used in systems that require non-ECC or load-reduced memory.
32GB Single-DIMM Capacity Limit
The decisive specification is the 32GB capacity delivered on one RDIMM, which determines the maximum memory per slot on the SA3400. If the chassis has multiple slots, each can accept an identical module, but a single stick cannot exceed this density. Buyers must verify the platform's total slot count and maximum supported memory before ordering.
จุดเด่น
- 32 GB module doubles Synology SA3400 memory capacity
- ECC registered design protects data integrity under load
- DDR4 2666 CL19 timing matches factory specifications
- 2 V operation keeps power draw low
- 288-pin RDIMM form factor fits the NAS slot
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR21300-324K1 |
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 2666MHZ PC4-21300 2Rx4 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory |
คำถามเกี่ยวกับสินค้านี้
Will the 288-pin DDR4 RDIMM fit the memory slots in my Synology SA3400?
Yes, the module is a 288-pin DDR4 RDIMM designed specifically for the Synology SA3400 NAS, so it matches the slot keying and electrical requirements of that system.
What is the correct way to seat the registered ECC module, and what step do people often miss?
Power down the NAS, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then verify in DSM that the full 32 GB is recognised at 2666 MHz with ECC active.
When should I expect to replace this 32 GB ECC RDIMM in a 24/7 NAS workload?
The module uses major OEM Samsung, Micron or Hynix chips rated for continuous server operation; under normal thermal conditions it typically lasts the life of the NAS, and ECC will correct single-bit errors before they affect data integrity.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



