NEMIX RAM
NEMIX RAM 32GB DDR4 3200 CL22 2Rx8 1.2V 260-Pin SODIMM POSIFLEX XT-8317E memory upgrade
A 32 GB DDR4 3200 SODIMM module built for the POSIFLEX XT-8317E terminal
- Capacity32GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity boosts POS terminal multitasking
- DDR4 3200 speed matches system memory bus
- CL22 latency suits fanless kiosk workloads
- 2 V operation keeps power draw low
- 260-pin SODIMM fits POSIFLEX XT-8317E slot
POSIFLEX XT-8317E memory upgrade
This 32GB DDR4 3200 SODIMM is built for the POSIFLEX XT-8317E point-of-sale terminal. It fits the 260-pin slot and runs at 1.2V without ECC or buffering. The single module uses major OEM chips from Samsung, Micron or Hynix and carries a CL22 latency rating. It targets technicians who need a direct-replacement stick for that specific JIVA fanless POS system.
Sustained load behaviour
The 2Rx8 organisation spreads the 32GB capacity across two ranks of eight-bit wide chips, giving the memory controller two independent banks to interleave during long transactions. Unbuffered operation means the module relies on the POS terminal's own memory controller for signal integrity, so stability depends on the platform's training routine rather than an onboard register. Stress testing by the supplier verifies that the stick maintains rated speed and latency under continuous read-write cycles typical of retail workloads.
Thermals noise and power
No heat spreader is fitted, so the DRAM packages radiate directly into the terminal's fanless chassis airflow. At 1.20V the module draws only the standard DDR4 low-voltage current, adding minimal heat to an enclosure designed for passive cooling. Silent operation is inherent because there are no moving parts on the DIMM itself. The combination of low voltage and bare chips keeps thermal contribution small enough that the POS unit's existing thermal design handles it without modification.
จุดเด่น
- 32 GB capacity boosts POS terminal multitasking
- DDR4 3200 speed matches system memory bus
- CL22 latency suits fanless kiosk workloads
- 2 V operation keeps power draw low
- 260-pin SODIMM fits POSIFLEX XT-8317E slot
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-328K1 |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
คำถามเกี่ยวกับสินค้านี้
How much power does the 32GB DDR4 3200 CL22 SODIMM draw when the POS terminal runs all day?
The module operates at 1.20V, the standard DDR4 voltage, so it adds minimal heat and power load inside the fanless POSIFLEX XT-8317E chassis.
What must the POSIFLEX XT-8317E already have for this 260-pin SODIMM to work?
An empty DDR4 SODIMM slot that accepts 2Rx8 non-ECC unbuffered modules at 3200 MT/s and 1.2V.
Will this 32GB DDR4 3200 stick run with the original memory still installed in the XT-8317E?
Yes, if the terminal has a second SODIMM slot; the new module will down-clock to match the slower stick's speed and latency.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
Shenzhen Junxiangcheng Technology Co., 24-Bay 6Gb/s miniSAS 4U Server Chassis
- Rackmount
- 4U
STARTECH 4PCIE-PCIE-ENCLOSURE server chassis
- Accessories
iStarUSA Inc. D-118V2-ITX-DT 1U server chassis 11" depth
- 1U
- Black



