NEMIX RAM
NEMIX RAM 384GB 8x48GB DDR5 6400 CL52 2Rx8 ECC Registered RDIMM Supermicro H13DSH memory upgrade
Eight 48 GB DDR5 modules deliver 384 GB of registered ECC memory at 6400 MHz CL52 for the Supermicro H13DSH motherboard
- Capacity384GB (8 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 384 GB total capacity across eight 48 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated bandwidth for H13DSH platforms
- Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
- 10 V operation matches the motherboard's memory controller specification exactly
- 288-pin RDIMM form factor ensures physical and electrical fit in Supermicro H13DSH slots
Server memory upgrade for Supermicro H13DSH
This 384GB kit delivers eight 48GB DDR5 registered ECC modules built to the exact rank, voltage and timing the H13DSH memory controller expects. It is intended for administrators expanding a single compatible server to its full supported capacity.
Registered ECC RDIMM form factor
The 288-pin RDIMM registered architecture is the single specification that determines fitment; the board requires registered modules and will not accept unbuffered UDIMMs or SODIMMs. ECC corrects single-bit errors on the fly while the registered buffer lets every slot run fully populated at the rated 6400 MT/s speed.
384GB total capacity across eight slots
Eight 48GB dual-rank modules fill all available DIMM sockets on the H13DSH, providing maximum memory headroom for virtualisation, large databases and compute workloads. Capacity runs out when the platform's slot limit or per-socket maximum is reached, so further expansion requires a different server chassis.
จุดเด่น
- 384 GB total capacity across eight 48 GB modules for dense server workloads
- DDR5 6400 speed with CL52 latency delivers rated bandwidth for H13DSH platforms
- Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
- 10 V operation matches the motherboard's memory controller specification exactly
- 288-pin RDIMM form factor ensures physical and electrical fit in Supermicro H13DSH slots
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K8 |
| Capacity | 384GB (8 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 8X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
Will the 6400 MHz speed run at that rate on my Supermicro H13DSH?
The kit is rated DDR5 6400 (PC5-51200) and is verified for the Supermicro H13DSH motherboard. The board's memory controller must support that data rate for the modules to operate at the advertised speed.
Does the 288-pin RDIMM form factor match the slots on the H13DSH?
Yes. The kit uses the 288-pin Registered DIMM (RDIMM) form factor that the H13DSH requires. It is not a UDIMM or SODIMM, so it fits the server's DIMM slots mechanically and electrically.
What physical clearance do the modules need since they lack a heat spreader?
The modules have no heat spreader, so they occupy only the standard RDIMM height. Ensure the server chassis and CPU cooler allow the normal DIMM profile; no extra vertical clearance is required beyond the bare PCB.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



