NEMIX RAM
NEMIX RAM 48GB DDR5 5600MHz CL46 2Rx8 1.1V ECC Registered RDIMM memory upgrade
A 48 GB DDR5 RDIMM running at 5600 MHz with CL46 latency, ECC and registered buffering for Supermicro H13SSH servers
- Capacity48GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 48GB DDR5 capacity lets your server handle larger workloads
- 5600MHz speed transfers data at the rated DDR5-5600 frequency
- ECC registered design corrects single-bit errors and offloads the memory controller
- 1V operation matches the motherboard's required voltage for stable operation
- 2Rx8 288-pin RDIMM form factor fits the Supermicro H13SSH memory slots exactly
Exact-Match DDR5 Upgrade for Supermicro H13SSH
This 48GB DDR5 5600MHz PC5-44800 module is a registered ECC RDIMM built to the precise rank, voltage and timing the Supermicro H13SSH memory controller expects. It is recognised at full capacity and runs at its rated speed without manual tuning.
Sustained Enterprise Stability
Registered architecture offloads the memory controller so every slot runs fully populated at full capacity under continuous load. ECC catches and corrects single-bit errors on the fly, stopping silent data corruption and unplanned reboots before they reach production. The 1.1V operating voltage and CL46 latency remain steady during extended workloads.
Straightforward Slot Installation
The 288-pin RDIMM form factor fits only boards that require registered memory — not UDIMM or SODIMM slots. Builders must consult the system or motherboard manual for supported capacities, approved DIMM population order and installation steps before purchase. Missing the correct population sequence is the most common reason a module is not recognised.
จุดเด่น
- 48GB DDR5 capacity lets your server handle larger workloads
- 5600MHz speed transfers data at the rated DDR5-5600 frequency
- ECC registered design corrects single-bit errors and offloads the memory controller
- 1V operation matches the motherboard's required voltage for stable operation
- 2Rx8 288-pin RDIMM form factor fits the Supermicro H13SSH memory slots exactly
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K1 |
| Capacity | 48GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
How much power does the 48GB DDR5 5600MHz RDIMM draw at its 1.1V operating voltage?
The module runs at 1.1V, the standard DDR5 voltage, so power draw stays low even when the server runs continuously.
What motherboard slot and memory type are required to install this 288-pin RDIMM?
You need a server board with DDR5 RDIMM slots; the Supermicro H13SSH is the verified platform.
Will this registered ECC DDR5 module work in a board that only supports unbuffered UDIMMs?
No, registered RDIMMs require a memory controller that supports buffered architecture; they will not function in UDIMM-only systems.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



