NEMIX RAM
NEMIX RAM 512GB (8x64GB) DDR5 4800 CL40 ECC RDIMM X13SEI-F X13SEI-TF memory upgrade
Eight 64 GB DDR5 4800 CL40 ECC registered DIMMs at 1.1 V for SuperMicro X13SEI-F and X13SEI-TF servers
- Capacity512GB (8 x 64GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 512 GB total capacity from eight 64 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered design protects data integrity
- Low 1.10 V operating voltage reduces power draw
- Validated for SuperMicro X13SEI-F and X13SEI-TF motherboards
512 GB DDR5 ECC RDIMM kit for SuperMicro X13SEI-F
This 512 GB kit contains eight 64 GB DDR5 registered DIMMs built for SuperMicro X13SEI-F and X13SEI-TF motherboards. The modules run at 4800 MT/s with a CAS latency of 40 and operate at 1.10 V. ECC and registered buffering provide the data integrity required by server workloads.
Sustained-load behaviour with registered ECC
Registered buffering reduces electrical load on the memory controller, allowing all eight slots to stay populated without signal degradation during continuous operation. ECC corrects single-bit errors on the fly, preventing silent data corruption during long compute runs. The 1.10 V operating voltage keeps power draw steady under extended thermal stress.
CL40 latency at DDR5 4800 decides fit
The CL40 timing at 4800 MT/s is the single specification that determines whether this kit matches the motherboard's qualified vendor list. Systems validated for CL40 will train correctly; platforms requiring tighter latencies will not support these modules. Verify the QVL before purchase.
จุดเด่น
- 512 GB total capacity from eight 64 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered design protects data integrity
- Low 1.10 V operating voltage reduces power draw
- Validated for SuperMicro X13SEI-F and X13SEI-TF motherboards
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K8 |
| Capacity | 512GB (8 x 64GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 512GB (8X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
คำถามเกี่ยวกับสินค้านี้
How much heat and power does the 1.10V DDR5 4800 CL40 kit produce when all eight 64GB modules run continuously?
The kit operates at 1.10V, the standard DDR5 voltage, so sustained power draw and heat scale with the 512GB capacity and 4800 MT/s speed rather than any elevated voltage.
What motherboard and CPU combination must I already own for this 288-pin 2Rx4 registered ECC memory to function?
You need a SuperMicro X13SEI-F or X13SEI-TF motherboard with a CPU that supports DDR5-4800 registered ECC RDIMMs and enough DIMM slots for all eight modules.
Will the CL40 4800 MT/s timing hold when I keep older DDR5 modules in the same server?
The board will run every installed module at the slowest common speed and highest latency; mixing different DDR5 kits forces all slots to the lowest shared specification.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



