NEMIX RAM
NEMIX RAM 64GB DDR5 4800 ECC RDIMM 2Rx4 CL40 Dell 7875 memory upgrade
A 64 GB DDR5 4800 ECC registered DIMM with CL40 latency, 1.1 V operation and 2Rx4 organisation for Dell Precision 7875 workstations
- Capacity64GB
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- ECC protection prevents data errors in critical workloads
- Registered design stabilises signal integrity on Dell Precision 7875
- 64 GB capacity expands memory headroom for virtualisation
- DDR5 4800 speed delivers high bandwidth at 1.1 V
- 288-pin RDIMM form factor fits the workstation memory slots
Dell Precision 7875 memory upgrade
This 64GB DDR5 ECC RDIMM module is built for the Dell Precision Workstation 7875. It provides registered, error-correcting memory for workloads that require data integrity. The single 64GB stick uses a 2Rx4 organisation and runs at 4800 MT/s with CL40 latency.
Thermals and power draw
The module operates at 1.10V without a heat spreader. Registered buffering reduces electrical load on the memory controller during sustained server or workstation tasks. Power consumption scales with the 4800 MT/s data rate and the 2Rx4 rank configuration under normal operating conditions.
What the package includes
The box contains one 288-pin DDR5 RDIMM rated PC5-38400. No additional cables, software or cooling hardware are bundled. Compatibility is validated for the Dell Precision 7875, so installation follows the system manufacturer's standard memory upgrade procedure.
จุดเด่น
- ECC protection prevents data errors in critical workloads
- Registered design stabilises signal integrity on Dell Precision 7875
- 64 GB capacity expands memory headroom for virtualisation
- DDR5 4800 speed delivers high bandwidth at 1.1 V
- 288-pin RDIMM form factor fits the workstation memory slots
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K1 |
| Capacity | 64GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
คำถามเกี่ยวกับสินค้านี้
How do I install the 288-pin DDR5 RDIMM into the Dell Precision 7875, and what step is often missed?
Align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 4800 speed and ECC are recognised.
What maintenance or replacement will the 64GB 2Rx4 ECC module need over time?
No scheduled maintenance is required; if a correctable error count rises or the module fails, replace it with another DDR5 4800 CL40 1.1V RDIMM of the same capacity and rank.
What limit appears first when the 1.1V CL40 registered memory runs sustained workloads?
The CL40 latency at 4800 MT/s sets the throughput ceiling; sustained heavy loads will hit that timing boundary before voltage or thermal limits become a factor.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



