เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

NEMIX RAM

NEMIX RAM 768GB (12x64GB) DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H13SSF

SKU CH-N154-FASTD

768 GB DDR5 5600 kit of twelve 64 GB registered ECC RDIMMs built for the Supermicro H13SSF motherboard

  • Capacity768GB (12 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 768GB total capacity from twelve 64GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated performance on Supermicro H13SSF
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1V operation at 2Rx4 rank matches exact memory controller requirements
  • 288-pin RDIMM form factor ensures correct physical fit for this motherboard

768GB DDR5 5600 ECC RDIMM kit for Supermicro H13SSF

This 12-module kit delivers 768GB of registered ECC DDR5 memory at 5600 MT/s with CL46 latency. It is built for the Supermicro H13SSF motherboard and uses the 288-pin RDIMM form factor that board requires. Each 64GB module runs at 1.1V with a 2Rx4 rank configuration. The kit targets servers that need maximum supported capacity and error correction.

Sustained load behaviour

Registered buffering reduces electrical load on the memory controller so all twelve slots can run fully populated at rated speed without downclocking. ECC corrects single-bit errors in real time, preventing silent data corruption during long-running workloads. The 1.1V operating voltage keeps power draw stable across extended periods. CL46 timing is maintained continuously under full population.

Upgrade from partial or non-ECC configurations

This kit replaces smaller-capacity RDIMM sets or unbuffered modules that cannot reach 768GB on this platform. The jump is worth it when the application demands the full memory ceiling the H13SSF supports and requires ECC protection. It is not for systems limited to fewer than twelve DIMM slots or boards that only accept UDIMM or SODIMM form factors.

จุดเด่น

  • 768GB total capacity from twelve 64GB modules for maximum server memory density
  • DDR5 5600 speed with CL46 latency delivers rated performance on Supermicro H13SSF
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1V operation at 2Rx4 rank matches exact memory controller requirements
  • 288-pin RDIMM form factor ensures correct physical fit for this motherboard

ข้อมูลจำเพาะ

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K12
Capacity768GB (12 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 12X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

คำถามเกี่ยวกับสินค้านี้

How much power does the 1.1V DDR5 5600 kit draw when all twelve 64GB RDIMMs run continuously?

The modules operate at 1.1V, the standard DDR5 voltage, so each 64GB RDIMM draws only the power the memory controller requests at that voltage; total draw scales with the 768GB capacity and 5600 MT/s data rate.

What motherboard slot type and population rules must my Supermicro H13SSF already provide for this 12-module kit?

The board needs twelve 288-pin DDR5 RDIMM slots and must support 2Rx4 registered ECC DIMMs at 5600 MT/s; consult the H13SSF manual for the exact population order before installing all 768GB.

Will the 2Rx4 registered ECC RDIMMs work in the same channels as any 1Rx4 or 2Rx8 DDR5 modules I keep installed?

Mixing ranks or widths in a channel can prevent the memory controller from training at 5600 MT/s; the H13SSF manual lists approved combinations, so verify the existing DIMMs match the 2Rx4 registered ECC spec before adding this kit.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที