NEMIX RAM
NEMIX RAM 96GB DDR5 6400 CL52 1.1V 2Rx4 ECC Registered RDIMM memory upgrade
96 GB DDR5 6400 CL52 1.1 V 2Rx4 ECC registered RDIMM validated for Supermicro H13DSG-OM motherboards
- Capacity96GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 96 GB capacity enables large memory footprints for virtualization and databases
- DDR5 6400 speed with CL52 latency delivers rated throughput for demanding workloads
- Registered ECC architecture corrects single-bit errors and offloads the memory controller
- 1 V operation reduces power draw in fully populated server configurations
- 288-pin RDIMM form factor matches Supermicro H13DSG-OM motherboard requirements
Exact-match DDR5 upgrade
This 96GB DDR5 6400 RDIMM delivers the precise CL52 timing, 1.1V voltage and 2Rx4 rank the server memory controller expects so it is recognised at full capacity and runs at its rated speed. It targets administrators upgrading Supermicro H13DSG-OM platforms that require registered ECC modules.
Registered ECC build
The registered architecture buffers address and command signals so every slot can run fully populated while ECC corrects single-bit errors on the fly preventing silent data corruption. The 288-pin form factor fits only RDIMM slots — not UDIMM or SODIMM — and the modules ship without a heat spreader for dense server chassis.
Check population rules
Server memory support varies by model so consult the system or motherboard manual for approved capacities DIMM population order and installation steps before ordering. Buyers who need unbuffered UDIMMs or consumer SODIMMs cannot use this registered kit.
จุดเด่น
- 96 GB capacity enables large memory footprints for virtualization and databases
- DDR5 6400 speed with CL52 latency delivers rated throughput for demanding workloads
- Registered ECC architecture corrects single-bit errors and offloads the memory controller
- 1 V operation reduces power draw in fully populated server configurations
- 288-pin RDIMM form factor matches Supermicro H13DSG-OM motherboard requirements
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K1 |
| Capacity | 96GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
What DDR5 speed and CAS latency does this 96GB RDIMM run at?
This module operates at DDR5 6400 (PC5-51200) with a CAS latency of CL52, delivering the rated transfer rate and timing the server's memory controller expects.
What physical slot and form factor does this 288-pin RDIMM require?
It fits a standard 288-pin DDR5 RDIMM slot; the registered form factor is keyed differently from UDIMM or SODIMM, so it only installs in server boards that accept registered modules.
How do I install this 2Rx4 ECC Registered RDIMM in a Supermicro H13DSG-OM, and what step is often missed?
Power down, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both latches click, then consult the motherboard manual for the correct population order — skipping that order is the common mistake.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



