SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00500875BTC
มีสินค้า
NEMIX RAM
NEMIX RAM CSE-735D4-1K26B 16GB DDR5 4800 ECC RDIMM memory upgrade
16 GB DDR5 ECC registered DIMM running at 4800 MHz for SuperMicro SuperWorkstation SYS-531A-I
- Capacity16GB
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- DDR5 4800 speed accelerates server workloads
- ECC registered design protects critical data integrity
- 16 GB single module simplifies capacity upgrades
- 1 V operation reduces platform power draw
- Validated for Supermicro SYS-531A-I workstation compatibility
NEMIX RAM 16GB DDR5 4800 ECC RDIMM
This 16GB DDR5 4800 ECC RDIMM module is built for Supermicro SuperWorkstation SYS-531A-I systems requiring registered memory. It operates at 1.10V with CL40 latency and uses a 288-pin form factor. The single-rank 1Rx8 design uses major OEM chips from Samsung, Micron or Hynix.
Suited for Supermicro workstation upgrades needing
This module fits builders expanding a compatible Supermicro platform with registered DDR5 memory. It is not for systems that require unbuffered UDIMMs, non-ECC modules, or speeds beyond the 4800 MT/s rating. Buyers needing higher capacities per slot or lower latencies should look at other configurations.
Straightforward DIMM installation
Installation follows typical server DIMM procedures: power down, open the chassis, align the 288-pin key, and press firmly until the ejectors lock. The most common issues are mixing registered and unbuffered modules, populating slots in the wrong order per the motherboard manual, or forgetting to enable ECC in the BIOS.
จุดเด่น
- DDR5 4800 speed accelerates server workloads
- ECC registered design protects critical data integrity
- 16 GB single module simplifies capacity upgrades
- 1 V operation reduces platform power draw
- Validated for Supermicro SYS-531A-I workstation compatibility
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K1 |
| Capacity | 16GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
คำถามเกี่ยวกับสินค้านี้
Does this DDR5 4800 1.1V RDIMM require a Supermicro X13SRA-TF motherboard to operate?
The module is built for Supermicro SuperWorkstation SYS-531A-I with X13SRA-TF and needs a DDR5-capable registered DIMM slot running at 1.1V.
Can this 288-pin CL40 ECC RDIMM share memory channels with existing DDR5 4800 registered modules in the same server?
Yes, matched DDR5 4800 1.1V CL40 1Rx8 registered DIMMs can populate open slots on the same channel following the motherboard population rules.
How can I verify the 16GB 1Rx8 ECC RDIMM is recognised at the rated 4800 MT/s after installation?
Check BIOS memory information or OS tools such as dmidecode to confirm 16GB, DDR5-4800, ECC registered, 1Rx8 operation at 1.1V.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
