BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278589BTC
มีสินค้า
NEMIX RAM
NEMIX RAM CSE-E302iL3 32GB (2x16GB) DDR5 4800 CL40 1.1V 262-Pin SODIMM memory upgrade
32 GB dual-channel DDR5 4800 CL40 SODIMM kit for SuperMicro SYS-E302-13AD systems
- Capacity32GB (2 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB dual-channel kit expands multitasking headroom
- DDR5 4800 MT/s speed matches Supermicro SYS-E302-13AD spec
- Low 1.10 V voltage reduces power draw
- CL40 latency supports responsive server workloads
- 262-pin SODIMM form factor fits SuperMicro IoT SuperServer
Compatible Memory Kit
This 32GB DDR5 SODIMM kit contains two 16GB modules rated at 4800MT/s with CL40 latency and 1.1V operation. It uses unbuffered non-ECC chips in a 262-pin form factor. The kit is validated for the SuperMicro IoT SuperServer SYS-E302-13AD model CSE-E302iL3 and the X13SAV-PS motherboard. Installation follows standard SODIMM procedure.
Builders With Matching Hardware
The kit suits technicians upgrading the specified SuperMicro IoT SuperServer or the X13SAV-PS platform where DDR5 SODIMM slots are available. It will not fit systems that require ECC registered DIMMs or standard 288-pin desktop memory. Buyers needing higher capacity per slot or lower latency timings should look at different modules. Laptops or workstations using another DDR5 SODIMM specification are not supported.
DDR5 4800 Speed Grade
The decisive specification is the DDR5 4800 speed grade, labelled PC5-38400, which determines whether the memory controller can train the modules at the rated frequency. If the target system only supports slower DDR5 speeds or an earlier DDR generation, the kit will not operate as intended. Matching this exact speed grade to the platform specification is the single compatibility gate.
จุดเด่น
- 32 GB dual-channel kit expands multitasking headroom
- DDR5 4800 MT/s speed matches Supermicro SYS-E302-13AD spec
- Low 1.10 V voltage reduces power draw
- CL40 latency supports responsive server workloads
- 262-pin SODIMM form factor fits SuperMicro IoT SuperServer
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS38400-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT |
คำถามเกี่ยวกับสินค้านี้
Should I pick the 32 GB kit or a single 16 GB module?
The kit supplies two matched 16 GB SODIMMs for 32 GB total, which lets the SuperMicro SYS-E302-13AD run in dual-channel mode for higher bandwidth.
What does DDR5 4800 CL40 deliver in the SuperMicro SYS-E302-13AD?
The modules operate at the standard JEDEC DDR5 4800 rate with CL40 latency, giving the server its rated memory throughput without overclocking.
Will the 262-pin DDR5 SODIMM fit the X13SAV-PS motherboard?
Yes — the kit uses the 262-pin DDR5 SODIMM form factor specified for the SuperMicro X13SAV-PS platform, and it runs at the supported 1.1 V.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
