NEMIX RAM
NEMIX RAM CSE-GS7A-000NBP3 32GB (2x16GB) DDR5 4800 CL40 ECC RDIMM memory upgrade
32 GB DDR5 ECC registered server memory kit with two 16 GB modules at 4800 MT/s CL40 for Supermicro workstations
- Capacity32GB (2 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 32 GB kit expands capacity for memory-intensive workloads
- DDR5 4800 speed handles high-throughput server tasks
- ECC registered design detects and corrects errors for data integrity
- 1 V operation reduces power draw under load
- Validated for Supermicro SYS-751A-I workstation compatibility
System-specific DDR5 ECC RDIMM kit
This 32 GB kit contains two 16 GB DDR5 4800 registered ECC modules built for Supermicro SuperWorkstation SYS-751A-I and X13DAI-T platforms. It targets IT professionals who need validated, single-rank memory for mission-critical server and workstation workloads.
Thermals noise and power draw
Operating at 1.1 V, the modules run without heat spreaders and rely on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping maintain stable power draw during sustained enterprise workloads.
Compatibility validation and support
Each module undergoes stress testing under load before shipping, and the kit is configured to match the exact density, rank and timing requirements of the listed Supermicro systems. Lifetime replacement coverage and access to experienced IT support staff back the installation.
จุดเด่น
- 32 GB kit expands capacity for memory-intensive workloads
- DDR5 4800 speed handles high-throughput server tasks
- ECC registered design detects and corrects errors for data integrity
- 1 V operation reduces power draw under load
- Validated for Supermicro SYS-751A-I workstation compatibility
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
คำถามเกี่ยวกับสินค้านี้
How do I install the 288-Pin DDR5 RDIMM modules in the SuperMicro SYS-751A-I, and what step is often missed?
Power off the system, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify in BIOS that both 16GB sticks are detected at 4800 MT/s.
What maintenance or replacement will the ECC RDIMM kit need over its service life?
No routine maintenance is required; the modules have no heat spreaders or moving parts. If a stick fails, replace it with an identical 1Rx8 1.1V CL40 DDR5-4800 RDIMM to keep ECC and registered operation intact.
What limit appears first when the memory runs sustained workloads at 4800 MT/s?
The CAS latency of CL40 at 1.10V sets the timing ceiling; sustained throughput is bounded by the DDR5-4800 (PC5-38400) specification and the registered buffer's command-to-data delay.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



