NEMIX RAM
NEMIX RAM DDR5 5600 ECC RDIMM 576GB 6x96GB CL46 Supermicro H13SSH memory upgrade
A 576GB DDR5 ECC RDIMM kit of six 96GB modules at 5600MHz CL46, registered and 1.1V, validated for Supermicro H13SSH motherboards
- Capacity576GB (6 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 576 GB total capacity from six 96 GB modules for dense memory workloads
- DDR5 5600 speed with CL46 timing delivers rated bandwidth without manual tuning
- Registered ECC architecture corrects single-bit errors and supports full population stability
- 1 V operating voltage matches the DDR5 standard for efficient server operation
- Verified compatible with Supermicro H13SSH motherboard for guaranteed fitment
Exact DDR5 576GB upgrade for Supermicro H13SSH
This 576GB kit contains six 96GB DDR5 5600 RDIMMs built to the precise 2Rx4 1.10V CL46 specification the H13SSH memory controller expects. It is intended for administrators expanding a single Supermicro H13SSH server to its full registered ECC capacity.
DDR5 RDIMM registered architecture limits
Registered buffering allows every slot to run fully populated at the rated 5600 speed, while ECC corrects single-bit errors on the fly. The 288-pin DDR5 form factor is mandatory; UDIMM or SODIMM modules will not fit and cannot be used in this board.
6 x 96GB 2Rx4 CL46 kit decides fit
The six-module 2Rx4 layout must match the motherboard's approved population order and maximum supported capacity per slot. If your H13SSH configuration requires a different rank structure, total capacity, or DIMM count, this kit will not be recognised at full speed or capacity.
จุดเด่น
- 576 GB total capacity from six 96 GB modules for dense memory workloads
- DDR5 5600 speed with CL46 timing delivers rated bandwidth without manual tuning
- Registered ECC architecture corrects single-bit errors and supports full population stability
- 1 V operating voltage matches the DDR5 standard for efficient server operation
- Verified compatible with Supermicro H13SSH motherboard for guaranteed fitment
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K6 |
| Capacity | 576GB (6 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
Should I pick the 576GB 6x96GB kit or a different capacity for my Supermicro H13SSH?
The 576GB kit uses six 96GB modules to fill all slots at the rated DDR5-5600 speed. Check your motherboard manual for the approved population order and maximum supported capacity before choosing a smaller or larger kit.
What does the DDR5-5600 CL46 rating deliver once installed in the H13SSH?
The modules run at 5600 MT/s with a CAS latency of 46 cycles at 1.10V. Registered ECC operation keeps every slot stable at full population while correcting single-bit errors on the fly.
How does the 288-pin RDIMM interface limit performance on this board?
The 288-pin Registered DDR5 form factor is the only type the H13SSH accepts. It caps the kit to the board's native DDR5-5600 transfer rate and requires the 2Rx4 rank structure for full 576GB recognition.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



