NEMIX RAM
NEMIX RAM DDR5 6400 128GB 2Rx4 ECC RDIMM Supermicro H14SHM memory upgrade
128 GB DDR5 6400 registered ECC RDIMM, 2Rx4 CL52 at 1.1 V, validated for Supermicro H14SHM motherboards
- Capacity128GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match 128 GB DDR5-6400 CL52 1.1 V 2Rx4 registered ECC RDIMM runs at rated speed
- Verified fit for Supermicro H14SHM 288-pin RDIMM slots — not UDIMM or SODIMM
- Registered architecture offloads controller so every slot runs fully populated at full capacity
- ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots
- Lifetime replacement warranty with free US-based technical support included
Server-Specific DDR5 RDIMM
This 128GB DDR5 6400 (PC5-51200) registered ECC module is built to the exact rank, voltage, and timing the Supermicro H14SHM motherboard expects. The 2Rx4 organization and 1.10V operation let the board recognize full capacity and run at rated speed without manual tuning.
Suited For Verified H14SHM Upgrades
Administrators expanding a Supermicro H14SHM platform with matched registered ECC memory will find the correct 288-pin RDIMM form factor and CL52 latency. Builders using consumer UDIMMs, SODIMMs, or non-ECC modules cannot use this kit; the board requires registered architecture and ECC for full-slot population.
Fits Registered ECC Memory Channels
The module plugs directly into the H14SHM DDR5 RDIMM slots, satisfying the board's population rules for registered memory. Registered buffering offloads the memory controller so every populated slot operates at 6400 MT/s, while on-die ECC corrects single-bit errors before they affect workloads. Consult the motherboard manual for approved DIMM order and maximum supported capacity per channel.
จุดเด่น
- Exact-match 128 GB DDR5-6400 CL52 1.1 V 2Rx4 registered ECC RDIMM runs at rated speed
- Verified fit for Supermicro H14SHM 288-pin RDIMM slots — not UDIMM or SODIMM
- Registered architecture offloads controller so every slot runs fully populated at full capacity
- ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots
- Lifetime replacement warranty with free US-based technical support included
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
What motherboard slot and memory type must my server already have to accept this 128GB DDR5 6400 RDIMM?
The Supermicro H14SHM must provide a 288-pin DDR5 RDIMM slot; the module is a registered ECC DIMM keyed for that exact socket and will not fit UDIMM or SODIMM slots.
How does the registered ECC design of this 2Rx4 module affect stability when I fill remaining slots on the H14SHM?
Registered buffering reduces electrical load on the memory controller so every populated slot can run at the rated 6400 MT/s, while ECC corrects single-bit errors on the fly to prevent silent data corruption.
Which BIOS indications confirm the kit is running at its rated 6400 MT/s with CL52 timing after installation?
POST memory summary or BIOS setup should show 6400 MT/s (PC5-51200), CAS latency 52, 1.1 V, 2Rx4 organization and the full 128 GB capacity per module.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



