NEMIX RAM
NEMIX RAM DDR5 6400 ECC RDIMM 768GB 6x128GB CL52 1.1V 2Rx4 Supermicro H14SSL-NT memory upgrade
A 768 GB kit of six 128 GB DDR5 ECC registered DIMMs running at 6400 MT/s CL52 1.1 V, validated for the Supermicro H14SSL-NT motherboard
- Capacity768GB (6 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 768 GB total capacity from six 128 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated throughput for memory-intensive workloads
- Registered ECC architecture corrects single-bit errors and supports full-population stability
- 1 V operation matches the board's voltage spec for reliable recognition
- 288-pin RDIMM form factor fits Supermicro H14SSL-NT memory slots exactly
Exact-match DDR5 kit for Supermicro H14SSL-NT
This 768GB kit contains six 128GB DDR5 RDIMMs built to the exact rank, voltage and timing the Supermicro H14SSL-NT memory controller expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly. It is not for systems that require UDIMM or SODIMM form factors.
2Rx4 registered ECC at CL52 1.1V
Each module is a 288-pin DDR5 RDIMM rated at 6400 MT/s (PC5-51200) with CAS latency 52 and 1.10V operating voltage. The 2Rx4 organisation and registered buffer match the board's population rules so the full 768GB is recognised without down-clocking. Buyers whose platforms demand a different rank structure or voltage cannot use this kit.
Low-voltage DDR5 thermals
Running at 1.1V keeps power draw modest even with all six slots populated, so standard server airflow handles thermals without extra cooling. No heat spreaders are fitted, relying on the chassis directed airflow design. Systems with restricted ventilation or passive-only cooling should verify thermal headroom before installing a fully populated configuration.
จุดเด่น
- 768 GB total capacity from six 128 GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated throughput for memory-intensive workloads
- Registered ECC architecture corrects single-bit errors and supports full-population stability
- 1 V operation matches the board's voltage spec for reliable recognition
- 288-pin RDIMM form factor fits Supermicro H14SSL-NT memory slots exactly
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K6 |
| Capacity | 768GB (6 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 6X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
Will the 768 GB capacity run at the full 6400 MT/s on my Supermicro H14SSL-NT?
The kit is spec-matched to the H14SSL-NT memory controller, so all six 128 GB modules operate at DDR5-6400 with CL52 timings at 1.1 V when installed in the correct population order.
Does the PC5-51200 rating limit the actual throughput on this board?
PC5-51200 is the peak transfer rate for DDR5-6400; the registered ECC design lets every slot run at that bandwidth without downclocking when fully populated.
Will these 288-pin RDIMMs physically fit the H14SSL-NT memory slots?
Yes — the modules use the standard 288-pin RDIMM form factor required by the H14SSL-NT, and the kit contains six sticks to fill the supported channels.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



