BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278882BTC
มีสินค้า
NEMIX RAM
NEMIX RAM POSIFLEX POS DDR4 2400 16GB (2x8GB) CL17 260-PIN SODIMM Kit memory upgrade
A 16 GB dual-channel DDR4 SODIMM kit running at 2400 MT/s with CL17 latency for POSIFLEX XT-6317 terminals
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts POS terminal responsiveness
- DDR4 2400 MHz speed matches POSIFLEX XT-6317 memory bus
- CL17 latency and 1.2 V operation keep power draw low
- 260-pin SODIMM form factor fits the JIVA fanless chassis
- Major OEM DRAM chips tested under load for 24/7 reliability
POSIFLEX XT-6317 JIVA upgrade kit
This 16GB kit uses two 8GB DDR4 SODIMM modules built for the POSIFLEX XT-6317 JIVA high-end fanless POS terminal. The 260-pin unbuffered design matches the system memory slot without adapters. CL17 timing at 2400MHz delivers the specified latency for stable transaction processing. IT teams can install the pair in minutes by following the terminal service guide.
Sustained transaction workloads
Modules are stress-tested under load before shipping to verify reliability during continuous retail or hospitality operations. The 1.2V operating voltage keeps thermal output low inside the fanless chassis. Major OEM DRAM from Samsung, Micron or Hynix provides consistent signal integrity across long shifts. Dual-rank 2Rx8 organisation supports the memory controller efficiency the platform expects.
Replaces lower-capacity factory memory
The kit upgrades terminals that shipped with 4GB or 8GB total memory to the full 16GB the board accepts. Extra headroom prevents swapping when multiple POS applications run together. The jump is worth it when order volume grows or new software adds memory pressure. Systems already at 16GB gain no capacity benefit from this kit.
จุดเด่น
- 16 GB dual-channel kit boosts POS terminal responsiveness
- DDR4 2400 MHz speed matches POSIFLEX XT-6317 memory bus
- CL17 latency and 1.2 V operation keep power draw low
- 260-pin SODIMM form factor fits the JIVA fanless chassis
- Major OEM DRAM chips tested under load for 24/7 reliability
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS19200-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT |
คำถามเกี่ยวกับสินค้านี้
How much heat does the 1.2 V DDR4 2400 kit add when the POS terminal runs all day?
Operating at 1.2 V without a heat spreader, the modules add minimal thermal load to the fanless POSIFLEX XT-6317 chassis during continuous operation.
What must the POSIFLEX JIVA terminal already have for this 260-PIN SODIMM kit to work?
The terminal needs two free DDR4 SODIMM slots that accept 2Rx8 non-ECC unbuffered modules at 2400 MT/s.
Will the CL17 16 GB kit run stably alongside the original 8 GB stick in my XT-6317?
The kit is validated for the XT-6317; mixing ranks or speeds can cause instability, so replace the original memory with the matched 2 x 8 GB pair.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
