OEM Industries
OEM Industries 3010CL-10RAV 30mm 10V .07A 3-Pin CPU cooler
30 mm DC fan with 10 V, 0.07 A draw and three-pin connector in an aluminium frame
- Color2-Tone
- TypeFan only
- Fan Size30mm
- Power Connector3 Pin
- LEDNo
- Compact 30 mm fan fits tight CPU spaces
- 10 V, .07 A rating keeps power draw low
- Three-pin connector enables speed monitoring
- Aluminium frame adds rigidity without weight
- SHICOH ICFAN 3010 design built for steady airflow
Compact 30 mm 3-pin CPU fan
This OEM Industries cooler is a 30 mm square DC fan rated at 10 V and 0.07 A with a three-pin power connector and an aluminium frame. It is intended as a direct replacement for SHICOH ICFAN 3010 models in small-form-factor or embedded systems where a low-profile axial fan is required.
Buyers needing a tiny two-wire
The unit suits technicians servicing legacy 3010-format coolers or custom enclosures that accept only a 30 mm frame and a three-pin header. It will not serve anyone needing PWM speed control, higher static pressure for dense heatsinks or a larger frame.
10 V 0.07 A three-pin power rating
The 10 V, 0.07 A electrical specification is the single figure that determines whether this fan matches the original cooler’s voltage and current budget; verify the header supplies exactly 10 V before fitting.
จุดเด่น
- Compact 30 mm fan fits tight CPU spaces
- 10 V, .07 A rating keeps power draw low
- Three-pin connector enables speed monitoring
- Aluminium frame adds rigidity without weight
- SHICOH ICFAN 3010 design built for steady airflow
ข้อมูลจำเพาะ
| Model | 3010CL-10RAV |
|---|---|
| Color | 2-Tone |
| Type | Fan only |
| Fan Size | 30mm |
| Power Connector | 3 Pin |
| LED | No |
คำถามเกี่ยวกับสินค้านี้
What does the 10 V .07 A rating mean once the cooler is installed?
The fan runs from a 10 V supply and draws .07 A, placing minimal load on the motherboard header.
What does the 3-pin connector limit in practice?
A 3-pin header supplies fixed voltage, so speed is set by the board's voltage control rather than PWM duty cycles.
What clearance does the 30 mm square frame need to fit?
The cooler occupies a 30 mm by 30 mm footprint, so the mounting holes and surrounding components must allow that space.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



