OEM Industries
OEM Industries YW04510012BH 45mm CPU cooler
Compact 45 mm ball-bearing fan delivers 12 V cooling for tight CPU spaces
- ColorBlack
- TypeFan only
- Fan Size45mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- Compact 45 mm fan fits tight builds
- Ball bearing ensures long, quiet operation
- 12 V, 0.14 A draws minimal power
- Standard 3-pin connector simplifies installation
- 10 mm slim profile clears low-profile cases
Compact 45 mm fan-only cooler
The OEM Industries YW04510012BH is a 45 mm square, 10 mm thick fan unit designed for tight clearance spots such as small-form-factor cases, rackmount servers or embedded boards. It draws 0.14 A at 12 V through a standard three-pin connector and uses a ball bearing for longer life than sleeve alternatives.
Capacity and headroom
At 4.5 cm side length the fan moves enough air for low-power CPUs, chipset heatsinks or VRM zones, but it cannot sustain heavy desktop processors under prolonged load. The three-pin header provides voltage control only, so speed ramps linearly with voltage rather than offering PWM precision.
Thermals noise and power
Ball-bearing construction keeps acoustic output steady over time, while the 12 V 0.14 A draw adds minimal load to a system fan header. In typical chassis airflow the unit runs quietly at idle and remains audible but not intrusive when spun up for sustained component cooling.
จุดเด่น
- Compact 45 mm fan fits tight builds
- Ball bearing ensures long, quiet operation
- 12 V, 0.14 A draws minimal power
- Standard 3-pin connector simplifies installation
- 10 mm slim profile clears low-profile cases
ข้อมูลจำเพาะ
| Model | YW04510012BH |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 45mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
คำถามเกี่ยวกับสินค้านี้
Will this 45mm fan fit alongside my existing 3-pin headers on an older motherboard?
Yes, it uses a standard 3-pin connector running at 12V and 0.14A, so it plugs directly into any legacy 3-pin header without adapters.
How can I confirm the ball-bearing fan is spinning correctly after installation?
Connect the 3-pin header, power on the system, and verify the fan rotates smoothly at 12V; the ball bearing should run quietly with no grinding or wobble.
Does the box include mounting screws or a heatsink, or is it only the 45x45x10mm fan unit?
The package contains only the 45mm Y.S.TECH 4510 fan itself; mounting screws, a heatsink base or any additional brackets must be sourced separately.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



