OWC 2GB DDR3 1333 CL9 1Rx8 1.5V SODIMM Dell Inspiron 17R N7110 memory upgrade
- 2GB
- 204-Pin DDR3 Non-EC…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
2GB DDR3 1333 SODIMM module upgrades Dell Inspiron One 2205, 2310 and 2320 systems
This 2GB DDR3 SODIMM is built for the Dell Inspiron One 2205, 2310 and 2320 all-in-one desktops. It delivers a straightforward memory increase for owners of those specific models who want snappier multitasking. The module follows JEDEC and RoHS standards and carries a limited lifetime warranty with free technical support.
Buyers with any other laptop, Mini PC, NAS or desktop should look elsewhere because this part is validated solely for the three Dell all-in-one systems named above. It will not work in machines that require ECC, registered DIMMs, a different voltage or a different DDR generation.
The decisive figure is the 1333 MHz DDR3 speed with CL9 latency at 1.5 V in a 204-pin unbuffered SODIMM. Matching that exact speed, voltage and form factor is what makes the module compatible with the supported Dell Inspiron One units.
| Brand | OWC |
|---|---|
| Part Number | 1S3D31R802GB |
| Capacity | 2GB |
| Type | 204-Pin DDR3 Non-ECC SODIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | Dell Inspiron One 2205 Dell Inspiron One 2310 Dell Inspiron One 2320 |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Yes, the module is a 204-pin DDR3 SODIMM rated for 1.5 V and will only work in slots that accept that pin count and voltage.
It will run alongside existing 1333 MHz DDR3 modules; the system will operate all sticks at the lowest common speed and timing.
Check the memory speed and CAS latency in the BIOS or with a tool such as CPU-Z; both should show 1333 MHz and CL9.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม