OWC 4GB DDR4 2400 CL17 SODIMM HP Pavilion 14-bf memory upgrade
- 4GB
- 260-Pin DDR4 Non-EC…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
4GB DDR4 2400 CL17 1.2V SODIMM upgrades compatible HP Pavilion all-in-one models
This 4 GB DDR4 2400 CL17 SODIMM is built specifically for HP Pavilion 27-r076ns, 27-r094nz, 27-r102np, 27-r103no and 27-r104ns all-in-one PCs. It is a non-ECC, unbuffered module that runs at 1.2 V and follows JEDEC specifications. The upgrade suits owners of those systems who want a straightforward memory increase.
The module operates at DDR4 2400 with a CAS latency of 17, delivering consistent throughput during extended workloads. Because it is unbuffered and has no heat spreader, thermal headroom depends on the chassis airflow of the Pavilion 27 unit. JEDEC compliance ensures stable operation at the rated voltage over long sessions.
Check how many SODIMM slots your Pavilion 27 model provides and what total memory the board supports. The kit is a single 4 GB stick, so adding it to an occupied slot may not increase usable capacity if the limit is already reached. Matching capacity, speed and manufacturer across all populated slots is recommended for optimal performance.
| Brand | OWC |
|---|---|
| Part Number | 2S4D41R804GB |
| Capacity | 4GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | HP Pavilion 27-r076ns HP Pavilion 27-r094nz HP Pavilion 27-r102np HP Pavilion 27-r103no HP Pavilion 27-r104ns |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The module operates at the standard DDR4 voltage of 1.2V. As a low-power, unbuffered SODIMM without a heat spreader, it adds minimal heat and draws only the current required for its 4GB capacity at 2400MHz speed.
The system needs a free DDR4 SODIMM slot that accepts 260-pin unbuffered non-ECC modules at 1.2V. The existing memory should also run at DDR4 2400 (PC4-19200) with CL17 timing for optimal compatibility.
Yes, the module meets JEDEC DDR4 2400 standards. For best stability, OWC recommends matching capacity, speed and manufacturer. If the original RAM is also DDR4 2400 CL17 1.2V, the system will run both at the common 2400MHz speed.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม