OWC 8GB (2x4GB) DDR3 1866 ECC Unbuffered UDIMM desktop RAM
- 8GB (2 x 4GB)
- DDR3 1866 (PC3 1490…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
A dual-channel 8GB DDR3 1600 CL11 ECC unbuffered UDIMM kit for desktops, workstations and servers
Capacity 8GB (2 x 4GB)
This kit contains two 4 GB DDR3 modules for a total of 8 GB. The sticks are unbuffered ECC UDIMMs rated at PC3-12800 with CL11 timing and 1.5 V operation. They are built for desktops, workstations and NAS systems that require error-correcting memory.
Without a heat spreader the modules run at standard JEDEC voltage and draw minimal power during typical workloads. Passive cooling inside a chassis with ordinary airflow keeps temperatures well within specification. Acoustic impact is negligible because the memory produces no active noise.
Continuous read and write cycles at 1600 MHz maintain stable CL11 latency without throttling. ECC circuitry corrects single-bit errors on the fly, preserving data integrity during long rendering, compilation or file-server sessions. The dual-channel pair delivers consistent bandwidth for multi-threaded workloads.
| Brand | OWC |
|---|---|
| Part Number | 1E6D31R8008P |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The kit uses 240-pin DDR3 UDIMMs at 1.5V, the standard desktop form factor; verify your board supports DDR3 and unbuffered ECC before buying.
Mixing ECC and non-ECC DIMMs is not recommended; most platforms will disable ECC or refuse to boot, so populate all slots with identical ECC modules.
CL11 at 1600 MHz is the standard JEDEC latency for DDR3-1600; it delivers the baseline speed the platform expects without manual tuning.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม