OWC 8GB DDR4 2666 CL19 1Rx8 ECC UDIMM memory upgrade
- 8GB
- 288-Pin DDR4 ECC UD…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
8GB DDR4 2400 CL17 2Rx8 SODIMM upgrade for NCR SelfServ XK22 (2246) kiosks
This OWC module is an 8GB DDR4 SODIMM built specifically for the NCR SelfServ XK22 (2246). It delivers 2400 speed with CL17 latency at 1.2V in a 260-pin unbuffered non-ECC form factor. The 2Rx8 rank configuration matches the platform requirements for a direct fit.
The module upgrades the existing memory in the SelfServ XK22 (2246) to a higher capacity. The jump is worth it when the kiosk runs multiple applications or larger data sets that exceed the current RAM limit. JEDEC compliance ensures the upgrade is warranty-safe and meets OEM specifications.
Installation uses the standard SODIMM slot inside the NCR unit with no extra cables or brackets required. The low-profile design without a heat spreader clears tight internal spacing. Matching capacity, speed, and manufacturer across all populated slots maintains optimal memory performance.
| Brand | OWC |
|---|---|
| Part Number | 2S4D42R808GB |
| Capacity | 8GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | NCR Kiosk SelfServ XK22 (2246) |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Yes, the module uses the standard 260-pin DDR4 SODIMM form factor required by the NCR SelfServ XK22 (2246).
Align the notch on the module with the key in the slot, press straight in until fully inserted, then push down until the retention clips lock on both sides.
No firmware updates or battery replacements are required; the memory is a passive component with no moving parts or onboard power source.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม