OWC 8GB DDR4 2400 CL17 1Rx8 288-pin UDIMM for QNAP TS-873U TS-873U-RP TS-877
- 8GB
- 288-Pin DDR4 Non-EC…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
OWC
8GB DDR4 2666MHz CL19 UDIMM module for HP ProDesk 400 G5, 405 G4 and 600 G4 desktops
This 8GB DDR4 2666MHz CL19 module is built for HP ProDesk 400 G5 SFF, 400 G5 Tower, 405 G4 SFF, 600 G4 SFF and 600 G4 Tower systems. It uses a 288-pin unbuffered non-ECC design running at 1.2V. The kit provides a straightforward memory upgrade for those supported desktops.
Buyers with the exact HP ProDesk models listed can install this DIMM to add 8GB of capacity. Systems that require ECC or registered memory cannot use this module. Laptops and small-form-factor devices needing 260-pin SO-DIMMs are also incompatible. Check your motherboard manual before purchasing.
The module operates at DDR4 2666 (PC4-21300) with a CAS latency of 19. It is backward compatible with 2133MHz and 2400MHz bus speeds. This speed rating is the key specification that determines whether the part matches your system's memory controller requirements.
| Brand | OWC |
|---|---|
| Part Number | 2U6D41R808GB |
| Capacity | 8GB |
| Type | 288-Pin DDR4 Non-ECC UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | HP ProDesk 400 G5 SFF HP ProDesk 400 G5 Tower HP ProDesk 405 G4 SFF HP ProDesk 600 G4 SFF HP ProDesk 600 G4 Tower |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
No heat spreader is included or required; the module runs at the standard 1.2 V JEDEC voltage without one.
The CL19 latency at 2666 MHz is the limiting timing; the module does not support higher frequencies.
At the rated 1.2 V the module consumes only a few watts, producing minimal heat and no audible noise.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม