Replace Power
Replace Power H350N-00-RPSU-D 350 W ATX power supply
ATX replacement unit delivers 350 W with single-rail output and 20+4-pin main connector
- ColorGrey
- TypeATX
- Fans1
- Weight0.1
- 350 W output powers standard desktop builds
- Single 12 V rail delivers 16 A for stable CPU and GPU supply
- 20+4 pin main connector fits most ATX motherboards
- 17 ms hold-up time bridges brief mains interruptions
- 115 / 230 V input works worldwide without manual switching
Replacement Dell PSU
This Replace Power unit is a direct swap for the Bestec Dell PS-6351-2 and DPS-350XB-2 A power supplies. It delivers 350 W through a single 20+4 pin main connector and a +12 V rail rated at 16 A. The grey ATX chassis includes one fan and weighs 0.1 kg. It accepts 115 V or 230 V input at 50 Hz or 60 Hz.
Suits legacy Dell desktops
Builders restoring an older Dell system that originally shipped with the PS-6351-2 or DPS-350XB-2 A will find the correct pin-out and voltage rails here. The unit provides +3.3 V at 13 A, +5 V at 13 A, -12 V at 0.8 A, -5 V at 0.5 A and +5 VSB at 2.5 A. Systems that require modular cabling, additional PCIe power connectors or higher total wattage should look at a different power supply.
350 W single-rail design
The +12 V rail supplies 16 A, which sets the practical limit for CPU and drive power in the target machine. Rise time is under 70 ms and hold-up time is at least 17 ms at nominal input. If the build demands more +12 V current than 16 A, this unit will not meet the requirement.
จุดเด่น
- 350 W output powers standard desktop builds
- Single 12 V rail delivers 16 A for stable CPU and GPU supply
- 20+4 pin main connector fits most ATX motherboards
- 17 ms hold-up time bridges brief mains interruptions
- 115 / 230 V input works worldwide without manual switching
ข้อมูลจำเพาะ
| Brand | Replace Power |
|---|---|
| Model | H350N-00-RPSU-D |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
คำถามเกี่ยวกับสินค้านี้
Will the 20+4-pin main connector fit a standard ATX motherboard?
Yes, the unit provides a 20+4-pin main connector plus a +12V rail, matching the standard ATX motherboard power interface.
What is the common mistake when swapping this unit into a Dell chassis?
Forgetting to set the 115 / 230 V input voltage switch to match the local mains supply before powering on.
How long should the hold-up time of 17 ms last before the unit needs replacement?
The 17 ms minimum hold-up at nominal input is a design specification; if the system loses power sooner during brownouts, the capacitors may be ageing and the PSU should be replaced.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



