BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
SAMSUNG
16 GB DDR4 SO-DIMM running at 2666 MHz with CL19 latency and 1.2 V operation
This is a 16GB DDR4 SO-DIMM built for laptops that accept 260-pin modules. It runs at 2666MHz with CL19 latency and a standard 1.20V supply. The unbuffered, non-ECC design suits mainstream notebooks and compact workstations. Buyers needing registered or error-correcting memory should look elsewhere.
The module operates at the JEDEC-standard 2666MHz data rate under continuous load without requiring a voltage increase beyond 1.20V. CL19 timing provides predictable latency for multitasking and background services. Stability is validated through extended stress testing rather than brief benchmarks. Systems limited to lower memory speeds will clock the module down automatically.
Samsung DRAM components are assembled on a standard green PCB with gold edge contacts for reliable slot insertion. The low-profile height fits thin-and-light chassis where taller modules would conflict with the keyboard deck or cooling assembly. Dual-rank 2Rx8 organisation helps populate two-channel controllers efficiently. No heatsink or lighting is included, keeping weight minimal for portable devices.
| Brand | Samsung |
|---|---|
| Model | M471A2K43CB1-CTD |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| น้ำหนักในการจัดส่ง | 0.05 kg |
| ขนาดบรรจุภัณฑ์ | 70 × 30 × 1 mm |
The module runs at the standard DDR4 voltage of 1.20V and is unbuffered, so power draw and heat stay within normal laptop SO-DIMM limits for continuous operation.
A free DDR4 SO-DIMM slot that accepts 260-pin unbuffered non-ECC modules at 1.20V.
Yes, DDR4 modules automatically negotiate the highest common speed and latency supported by the memory controller.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม