BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
SK hynix
A 4 GB DDR3L 1600 SoDIMM running at 1.35 V with CL11 latency for laptop memory upgrades
This 4 GB DDR3L module runs at 1600 MHz with CL11 latency and a 1.35 V operating voltage. It uses the standard 204-pin SO-DIMM form factor for laptop memory slots. The unbuffered, non-ECC design suits mainstream notebook platforms. Buyers who need ECC error correction or registered buffering should look elsewhere.
The low-voltage DDR3L specification keeps power draw modest during extended workloads. CL11 timing delivers consistent access latency for everyday multitasking and office applications. Dual-rank organisation helps maintain throughput when the memory controller issues back-to-back requests. Systems limited to 1.5 V DDR3 slots may not boot with this 1.35 V module.
Verify that your laptop accepts 204-pin DDR3L SO-DIMMs and supports 1.35 V operation. Confirm the motherboard can address a 4 GB unbuffered non-ECC module in the target slot. Check whether the BIOS requires a specific SPD profile for DDR3L 1600 (PC3L 12800). Ensure no physical obstruction prevents the module from seating fully in the socket.
| Capacity | 4GB |
|---|---|
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
The module runs at 1.35V, the standard low voltage for DDR3L, which reduces power consumption and heat output compared to 1.5V DDR3 during continuous operation.
Your laptop needs a DDR3 SO-DIMM slot with 204 pins; the module is unbuffered and non-ECC, matching the vast majority of consumer notebook sockets.
Yes, matching speed (1600 MHz) and latency (CL11) allows the memory controller to run both sticks at their rated settings without downclocking.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม