SK hynix
SK hynix HMA851U6DJR6N-XN 8GB (2x4GB) DDR4-3200 desktop RAM
A dual-channel kit of two unbuffered 4 GB DDR4 modules running at 3200 MT/s with CL22 latency
- Capacity8GB (2 x 4GB)
- SpeedDDR4 3200 (PC4 25600)
- Tested Frequency22
- CAS LatencyCL22
- ECCNo
- Buffered/RegisteredUnbuffered
- 8 GB total capacity for everyday multitasking
- Dual-channel 2×4 GB kit improves bandwidth
- DDR4-3200 speed rated at PC4-25600
- Low 1.2 V operation reduces power draw
- 288-pin UDIMM fits standard desktop slots
8 GB DDR4-3200 dual-channel kit
This kit provides 8 GB of DDR4 desktop memory in two 4 GB unbuffered modules rated for 3200 MT/s at CL22. It is intended for mainstream PC builds or upgrades that need standard JEDEC performance without manual tuning.
Check 288-pin DDR4 slots and 1.2 V support
Verify that the motherboard has two free 288-pin DDR4 DIMM slots and runs memory at 1.2 V. The modules are unbuffered non-ECC UDIMMs, so they require a consumer desktop platform that accepts standard unregistered memory.
Steady throughput at rated JEDEC settings
Under sustained load the modules operate at their validated 3200 MT/s frequency with CL22 timings at the standard 1.2 V. No XMP profile or voltage increase is needed to maintain this throughput during extended workloads.
จุดเด่น
- 8 GB total capacity for everyday multitasking
- Dual-channel 2×4 GB kit improves bandwidth
- DDR4-3200 speed rated at PC4-25600
- Low 1.2 V operation reduces power draw
- 288-pin UDIMM fits standard desktop slots
ข้อมูลจำเพาะ
| Brand | Hynix |
|---|---|
| Series | Desktop Memory |
| Model | HMA851U6DJR6N-XN |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 22 |
| CAS Latency | CL22 |
| ECC | No |
| Buffered/Registered | Unbuffered |
คำถามเกี่ยวกับสินค้านี้
What comes in the box and do I need to buy anything else to install the 288-pin modules?
The package contains two 4 GB DDR4 UDIMM modules giving 8 GB total. No extra parts are required; the sticks plug directly into standard desktop DIMM slots.
Should I choose the CL22 kit or a lower-latency version for my DDR4-3200 build?
This kit runs at DDR4-3200 with CL22 timings at 1.2 V. If your motherboard supports XMP or manual timing adjustment you can select a tighter-latency kit, otherwise this CL22 set will operate at the rated speed out of the box.
What does the PC4-25600 rating mean once the memory is running in my PC?
PC4-25600 indicates a peak transfer rate of 25 600 MB/s per module at DDR4-3200. In practice the system will read and write at up to that bandwidth when the memory controller requests it.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



