STARTECH
STARTECH BRACKET125PTP 2.5" to 3.5" hdd accessory 5 pack tool-less
Five brackets let you mount a 2.5" SSD or HDD into a 3.5" bay without tools, supporting 7 mm and 9.5 mm drives
- ColorBlack
- Conversion Tray1 x 2.5" Drive to 3.5" Bay
- Protection CaseSingle Drive
- Compatible Products2.5"
- SpecificationsMaterial: Plastic Compatible Drive Types: SATA & IDE / SAS /
- FeaturesInstall one 2.5" SSD or HDD into a single 3.5" bay Tool-less
- Tool-less bracket installs in seconds without extra hardware
- Five-pack supplies multiple builds or spare units for IT projects
- Supports 7 mm and 9.5 mm drive heights for broad SSD and HDD compatibility
- Works with SATA, SAS and NVMe drives across IDE, U.2 and other interfaces
- Plastic construction keeps weight low while securely mounting one 2.5" drive per 3.5" bay
Five-pack tool-less brackets for 2.5" drives
This five-pack provides plastic brackets that convert a single 3.5" bay into a mount for one 2.5" SSD or HDD. Each bracket accepts drives measuring 7 mm or 9.5 mm in height and secures them without screws or tools. System builders and integrators can equip multiple workstations or servers from one package.
Fixed-mount design keeps drives stable under
The brackets hold each drive in a fixed position with plastic pegs, so vibration from sustained read and write cycles does not loosen the installation. Compatibility spans SATA, SAS and NVMe U.2 drives, allowing the same bracket to serve mixed drive pools in arrays or backup appliances that run for extended periods.
Passive plastic construction adds no noise
Because the brackets contain no fans, motors or electronic components, they generate zero acoustic output and draw no power from the system. The black plastic material fits standard 3.5" bays without obstructing airflow to neighbouring components, keeping thermal conditions unchanged during normal use.
จุดเด่น
- Tool-less bracket installs in seconds without extra hardware
- Five-pack supplies multiple builds or spare units for IT projects
- Supports 7 mm and 9.5 mm drive heights for broad SSD and HDD compatibility
- Works with SATA, SAS and NVMe drives across IDE, U.2 and other interfaces
- Plastic construction keeps weight low while securely mounting one 2.5" drive per 3.5" bay
ข้อมูลจำเพาะ
| Brand | StarTech.com |
|---|---|
| Model | BRACKET125PTP |
| Color | Black |
| Conversion Tray | 1 x 2.5" Drive to 3.5" Bay |
| Protection Case | Single Drive |
| Compatible Products | 2.5" |
| Specifications | Material: Plastic Compatible Drive Types: SATA & IDE / SAS / U.2 (PCIe, NVMe, SFF-8639) Drive Installation: Fixed Drive Size: 2.5in Number of 2.5 inch bays: 1 Supported Drive Height(s): 7mm / 9.5mm |
| Features | Install one 2.5" SSD or HDD into a single 3.5" bay Tool-less drive and bay installation Supports drives 7 mm or 9.5 mm in height Compatible with most 2.5" SSD/HDD drives including: IDE, SAS, SATA, U.2 and more |
| Package Contents | 5 x 2.5" SSD/HDD Mounting Brackets 30 x Plastic Pegs 1 x Quick-Start Guide |
| น้ำหนักในการจัดส่ง | 0.04 kg |
| ขนาดบรรจุภัณฑ์ | 155 × 110 × 95 mm |
คำถามเกี่ยวกับสินค้านี้
Does the plastic bracket add noticeable heat or noise when a drive runs all day?
The bracket is passive plastic with no moving parts, so it adds no heat or noise beyond the drive itself.
What must my case already have for these brackets to fit?
Your case needs standard 3.5-inch drive bays; the brackets mount tool-lessly into those bays using the included plastic pegs.
Will a 7 mm SATA SSD sit securely in this bracket alongside an older 3.5-inch mechanical drive in the next bay?
Yes, the bracket holds 7 mm and 9.5 mm drives firmly, and its fixed mounting keeps alignment consistent next to any 3.5-inch drive.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001048BTC
มีสินค้า