SXDOOL
SXDOOL D12BM-12D 12V 4-Pin 120×38mm 4400 RPM 2.3A
12 V four-pin case fan with dual-ball bearing runs at 4400 RPM and draws 2.3 A for high-airflow cooling in a 120 × 38 mm frame
- TypeCase Fan
- Bearing Type2 Ball
- RPM4000-4499 RPM
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- High airflow at 4400 RPM maximum speed
- Precise 4-pin PWM temperature control adjusts fan speed
- Dual ball bearing design extends operational lifespan
- High 2.3 A current delivers strong cooling power
- Compact 120 mm by 38 mm frame fits standard cases
SXDOOL D12BM-12D 12V 4-Pin Case Fan
The SXDOOL D12BM-12D is a 120 mm case fan built with a 2 ball bearing and a 4 pin power connector. It operates at 12 V and draws 2.3 A to reach a rotational speed of 4400 RPM within a 4000 to 4499 RPM range. The frame measures 120 by 120 by 38 mm and comes in black without LED lighting.
Suited for high static pressure cooling in tight
This fan suits builders who need strong airflow through dense radiators or restrictive meshes at 12 V 4 pin control. It is not for users who prefer quieter operation at lower RPM or who want addressable RGB illumination on their cooling hardware.
4400 RPM peak with 2.3 A headroom
At full speed the fan delivers maximum airflow for 12038 form factor cooling demands. The 2.3 A draw leaves little margin on standard 1 A headers so a dedicated high current header or fan controller is required to avoid throttling.
จุดเด่น
- High airflow at 4400 RPM maximum speed
- Precise 4-pin PWM temperature control adjusts fan speed
- Dual ball bearing design extends operational lifespan
- High 2.3 A current delivers strong cooling power
- Compact 120 mm by 38 mm frame fits standard cases
ข้อมูลจำเพาะ
| Type | Case Fan |
|---|---|
| Bearing Type | 2 Ball |
| RPM | 4000-4499 RPM |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
คำถามเกี่ยวกับสินค้านี้
What power connector must my motherboard or fan controller provide for the 4-pin 12 V fan?
The fan uses a standard 4-pin PWM connector that plugs into any 12 V 4-pin header on a motherboard or compatible fan controller.
Will the 4400 RPM maximum speed overwhelm a legacy 3-pin voltage-controlled header?
On a 3-pin header the fan runs at full 12 V, so it will spin at its top 4400 RPM without PWM regulation; ensure your chassis airflow can handle the output.
How can I verify the fan is responding to temperature changes after installation?
In BIOS or fan-control software, set a temperature curve and watch the reported RPM rise from the 4000 RPM floor toward 4400 RPM as the sensor temperature increases.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



