SXDOOL
SXDOOL MFB0201V1-C010-S99 12V 8.58W 4 Pin CPU Cooler
A 12V 4-pin CPU cooler fan drawing 8.58W for Lenovo all-in-one systems
- TypeCPU Cooler Fan
- Power Connector4 Pin
- Efficient cooling for Lenovo all-in-one systems
- 12 V DC power ensures stable fan operation
- 4-pin connector enables precise PWM speed control
- 58 W rated power delivers reliable airflow
- Sunon MFB0201V1-C010-S99 series built for OEM compatibility
Lenovo All-In-One replacement fan
The SXDOOL MFB0201V1-C010-S99 is a direct-fit CPU cooler for compatible Lenovo All-In-One systems. It targets owners who need a new OEM-specification fan to restore factory cooling performance.
4-pin PWM connector and two-tone housing
A standard four-pin power connector enables pulse-width modulation control by the system board. The two-tone plastic housing matches the original aesthetic and mounts using the existing screw pattern.
12 V operation at 8.58 W draw
Rated for 12 V DC input, the fan draws 8.58 W during normal operation. Speed scales with thermal load so acoustics stay low at idle and rise only when the processor demands additional airflow.
จุดเด่น
- Efficient cooling for Lenovo all-in-one systems
- 12 V DC power ensures stable fan operation
- 4-pin connector enables precise PWM speed control
- 58 W rated power delivers reliable airflow
- Sunon MFB0201V1-C010-S99 series built for OEM compatibility
ข้อมูลจำเพาะ
| Type | CPU Cooler Fan |
|---|---|
| Power Connector | 4 Pin |
คำถามเกี่ยวกับสินค้านี้
What does the 4-pin PWM connector on the SXDOOL MFB0201V1-C010-S99 allow the motherboard to control?
The 4-pin PWM connector lets the motherboard adjust fan speed automatically based on CPU temperature, using the fourth wire for the control signal.
What physical clearance should I check before fitting this cooler inside a Lenovo All-in-One chassis?
Verify the exact mounting hole pattern and overall height against the original Sunon MFB0201V1-C010-S99, as the unit is designed for that specific AIO layout.
How do I connect the 4-wire cable correctly so the fan reports its speed to the BIOS?
Align the keyed 4-pin plug with the motherboard CPU_FAN header; the tachometer wire (usually yellow) must seat in the third position for RPM reporting.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



