Thermaltake
Thermaltake Toughpower GX2 80+ Gold 600W Non-Modular power supply
A 600 W ATX power supply with 80 Plus Gold efficiency up to 90 percent, a single 12 V rail, 120 mm fan and full protection suite
- TypeATX12V / EPS12V
- Maximum Power600 W
- Fans1 x 120 mm
- SLISLI Ready
- CrossFireCrossFire Ready
- Max PSU Length140 mm
- 80 Plus Gold efficiency up to 90% reduces waste heat
- 120 mm Dynamic Bearing fan runs quietly under load
- Single +12V rail with DC-to-DC design feeds GPU cleanly
- OPP OVP UVP SCP protections guard every component
- Non-modular cable set includes 24-pin 4+4-pin 6 SATA 2 PCI-E 3 peripheral 1 FDD
600W Non-Modular ATX Power Supply
This Thermaltake Toughpower GX2 unit delivers 600 W of continuous power through a single +12 V rail. It fits standard ATX 12V 2.4 and EPS 12V 2.92 layouts and includes fixed cables for motherboard, CPU, two PCI-E (6+2 pin), six SATA, three peripheral and one FDD connector. The 120 mm dynamic-bearing fan keeps airflow steady while running quietly. Builders who need modular cabling or more than two GPU power plugs should look elsewhere.
80 Plus Gold Efficiency and Protection
The 80 Plus Gold certification means the supply reaches up to 90 % efficiency at typical loads and supports C6 and C7 low-power states. DC-to-DC conversion on the secondary side keeps ripple low, while OPP, OVP, UVP and SCP circuits protect connected hardware from over-power, over-voltage, under-voltage and short-circuit events. The non-modular design means every cable is present inside the case regardless of use, which can restrict airflow in compact chassis.
Fixed Connector Count and 140 mm Depth
Two PCI-E (6+2 pin) headers handle a single high-end graphics card or a dual-GPU setup that draws no more than two auxiliary plugs. Six SATA ports cover multiple SSDs or hard drives, while three 4-pin peripheral connectors serve older devices. The 140 mm housing depth fits most mid-tower cases, but very small form-factor enclosures may not accommodate it. Systems requiring three or more GPU power cables or a fully modular cable set exceed what this model provides.
จุดเด่น
- 80 Plus Gold efficiency up to 90% reduces waste heat
- 120 mm Dynamic Bearing fan runs quietly under load
- Single +12V rail with DC-to-DC design feeds GPU cleanly
- OPP OVP UVP SCP protections guard every component
- Non-modular cable set includes 24-pin 4+4-pin 6 SATA 2 PCI-E 3 peripheral 1 FDD
ข้อมูลจำเพาะ
| Brand | Thermaltake |
|---|---|
| Series | Toughpower GX2 |
| Part Number | PS-TPD-0600NNFAGU-2 |
| Type | ATX12V / EPS12V |
| Maximum Power | 600 W |
| Fans | 1 x 120 mm |
| SLI | SLI Ready |
| CrossFire | CrossFire Ready |
| Max PSU Length | 140 mm |
| Modular | Non-Modular |
| Energy-Efficient | 80 PLUS GOLD Certified |
คำถามเกี่ยวกับสินค้านี้
Should I pick the 600 W model or look for a higher-wattage version?
Choose the 600 W unit if your build draws less than that under full load; it delivers continuous power at the rated figure.
What does the 90 % efficiency rating mean once the PSU is installed?
At typical loads the unit converts at least 90 % of AC input to DC output, so less waste heat and lower electricity draw.
How does the ATX 12V 2.4 / EPS 2.92 spec limit what I can connect?
It guarantees the 24-pin main, 4+4-pin CPU and two 6+2-pin PCIe connectors are wired to current ATX standards.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



