SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Toshiba
An 80GB 2.5" SATA laptop drive with 5400 RPM, 8MB cache and 12ms seek time for notebook upgrades
This 80GB 2.5-inch laptop hard drive uses a SATA 3.0Gb/s interface and spins at 5400 RPM with 8MB cache. It suits owners of older notebooks or consumer-electronics devices that need a direct replacement drive with modest capacity.
The drive employs perpendicular magnetic recording technology for reliable data storage. Its standard SATA connector and 2.5-inch form factor allow straightforward installation in compatible drive bays, while low power consumption and minimal acoustics support quiet mobile operation.
Verify that your system accepts a 2.5-inch SATA drive with a 3.0Gb/s interface and 80GB capacity. Confirm the physical mounting points and connector orientation match the original drive, and ensure the BIOS or controller supports this capacity before ordering.
| Brand | TOSHIBA |
|---|---|
| Model | MHZ2080BH |
| Packaging | Retail |
| Interface | SATA 3.0Gb/s |
| Capacity | 80GB |
| Cache | 8MB |
| Average Seek Time | 12ms |
| Average Write Time | 14ms |
| Average Latency | 5.56ms |
| RPM | 5400 RPM |
| Features | Ultra-high capacity mobile hard disk drives (HDDs) feature perpendicular magnetic recording (PMR) technology Industry leading read/write, idle and standby power consumption Exceptionally high quality, reliability and performance with minimal heat and acoustics Ideal for notebooks and consumer electronics applications requiring high speed and high capacity |
| Form Factor | 2.5" |
The SATA 3.0Gb/s interface limits maximum transfer to 3.0 Gb/s.
The drive fits a standard 2.5" drive bay or caddy and uses the standard SATA data and power connectors.
Mount the drive in the bay, connect both SATA data and power cables, then initialise and format the 80GB volume in the operating system.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม