Tripp Lite
Tripp Lite SRSHELF4PHDVENT 1U vented rack shelf 250 lbs 113 kg case accessory
A 1U vented steel rack shelf holds 250 lbs (113 kg) of non-rack gear in 25.38 in (64.5 cm) depth
- TypesRack Shelf
- SpecificationsAdjustable Deep Rack Shelf Steel Vented 250lbs (113kg) Capac
- Features1U Vented Rack Shelf Secures Non-Rack Equipment in Your Data
- 1U vented shelf fits monitors and towers in standard 19-inch racks
- Adjustable brackets mount in 4-post enclosures from 19 to 25.38 inches deep
- 250 lb capacity holds heavy IT gear without bending
- Vented steel surface improves airflow to keep equipment cool
- Cold-rolled steel with powder coat resists wear in busy server rooms
1U vented rack shelf for non-rack IT gear
The Tripp Lite SRSHELF4PHDVENT is a 1U steel shelf that holds monitors, wireless access points and tower units inside a standard 19-inch four-post rack. It lets organisations keep non-rackmount equipment secure and organised without consuming extra floor or desk space.
Vented surface and 250 lb load capacity
A perforated steel deck promotes airflow around the installed devices while supporting up to 250 pounds (113 kilograms). The cold-rolled steel construction with black powder coating handles continuous weight without bending or overheating the gear above and below.
Adjustable depth brackets mount in 1U
Side brackets slide to match the rack depth from 19 inches to 25.38 inches (64.5 centimetres) and fasten with included hardware. The shelf occupies a single rack unit, leaving the remaining bays free for servers, switches or patch panels.
จุดเด่น
- 1U vented shelf fits monitors and towers in standard 19-inch racks
- Adjustable brackets mount in 4-post enclosures from 19 to 25.38 inches deep
- 250 lb capacity holds heavy IT gear without bending
- Vented steel surface improves airflow to keep equipment cool
- Cold-rolled steel with powder coat resists wear in busy server rooms
ข้อมูลจำเพาะ
| Brand | Tripp Lite |
|---|---|
| Model | SRSHELF4PHDVENT |
| Types | Rack Shelf |
| Specifications | Adjustable Deep Rack Shelf Steel Vented 250lbs (113kg) Capacity |
| Features | 1U Vented Rack Shelf Secures Non-Rack Equipment in Your Data Center This SmartRack adjustable-depth shelf supports monitors, wireless access points, tower units and other IT equipment not typically stored in a rack. Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, the SRSHELF4PHDVENT has a maximum load capacity of 250 pounds (113 kilograms). It mounts easily into 1U of space in an EIA-standard 19-inch 4-post enclosure or open frame rack using the included hardware. Maximizes Rack Space and Saves Desk or Floor Space in a Busy Office The steel shelf is |
| น้ำหนักในการจัดส่ง | 9.15 kg |
| ขนาดบรรจุภัณฑ์ | 483 × 63 × 44 mm |
คำถามเกี่ยวกับสินค้านี้
How do I install the SRSHELF4PHDVENT in a 4-post rack, and what step is often missed?
Mount the side brackets to the front and rear rails using the included hardware, adjusting them to match your rack depth. The step often missed is tightening the rear brackets after setting the depth, which can leave the shelf unstable under load.
What maintenance or replacement will the vented steel shelf need over time?
The cold-rolled steel with black powder-coated finish requires no scheduled maintenance. Inspect the mounting screws periodically for loosening from vibration. Replace the shelf only if the steel bends or the coating fails, exposing bare metal to corrosion.
At what load limit does the SRSHELF4PHDVENT show strain first during sustained use?
The maximum load capacity is 250 pounds (113 kilograms). Sustained loads at or near this limit will cause deflection in the 25.38-inch (64.5-centimeter) deep steel surface before any bracket failure occurs.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001049BTC
มีสินค้า