Western Digital
Western Digital Ultrastar 8 TB SATA 6 Gb/s 256 MB 7200 RPM internal hard drive
8 TB desktop hard drive with 7200 RPM spindle speed and 256 MB cache for high-capacity storage
- 8 TB capacity stores large media libraries
- 7200 RPM spindle speed delivers fast sequential access
- 256 MB cache buffers heavy read/write workloads
- SATA 6 Gb/s interface fits standard desktop bays
- Ultrastar series engineered for continuous operation
Western Digital Ultrastar 8 TB SATA drive
This 8 TB Western Digital Ultrastar drive connects via SATA 6 Gb/s and spins at 7200 RPM with a 256 MB buffer. It is built for desktop systems that need a large single volume for bulk storage, media libraries or backup archives. The 3.5-inch form factor fits standard internal drive bays.
Suited for high-capacity desktop storage.
This drive suits users who prioritise capacity per bay over random-access speed. It is not the right choice for operating-system boot volumes, heavy database workloads or applications that demand low latency and high IOPS. Builders who need faster access times should consider solid-state alternatives.
7200 RPM spindle speed defines sustained throughput
The 7200 RPM spindle speed is the specification that determines sequential read and write performance for large-file workloads. Combined with the 256 MB buffer and SATA 6 Gb/s interface, it delivers consistent throughput for streaming, archiving and batch processing. Verify that your motherboard or controller provides a free SATA port and adequate power.
จุดเด่น
- 8 TB capacity stores large media libraries
- 7200 RPM spindle speed delivers fast sequential access
- 256 MB cache buffers heavy read/write workloads
- SATA 6 Gb/s interface fits standard desktop bays
- Ultrastar series engineered for continuous operation
ข้อมูลจำเพาะ
ยังไม่มีข้อมูลจำเพาะที่เผยแพร่สำหรับสินค้านี้
คำถามเกี่ยวกับสินค้านี้
How much power does the 7200 RPM Ultrastar draw when it runs continuously?
The drive spins at 7200 RPM with a 256 MB cache and a SATA 6 Gb/s interface; typical idle power is around 5 W and active reads reach roughly 9 W.
What host connector and cable do I need to attach this HUS728T8TALE604 drive?
A standard SATA data cable and a SATA power connector from your power supply are required; the drive uses the 6 Gb/s SATA interface.
Will the 8 TB Ultrastar work in a system that only has SATA 3 Gb/s ports?
Yes, the SATA 6 Gb/s interface is backward-compatible and will negotiate down to 3 Gb/s on older controllers.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



