Western Digital
Western Digital WD2500HHTZ 250GB 10000 RPM SATA 64MB internal hard drive
A 250 GB desktop hard drive spinning at 10,000 RPM with 64 MB cache and a 2.5-inch mechanism mounted in a 3.5-inch frame with a built-in heat sink for cool operation in high-performance systems
- 10,000 RPM speed for fast data access
- 64 MB cache boosts burst throughput
- 250 GB capacity stores operating system and apps
- 5-inch mechanism in 3.5-inch frame fits standard desktop bays
- built-in heat sink keeps drive cool under load
Designed for high-speed desktop storage
This 250GB internal hard drive spins at 10000 RPM and connects through a SATA 6Gb/s interface. A 2.5-inch mechanism sits inside a backplane-ready 3.5-inch mounting frame with an integrated heat sink. The 64MB buffer helps smooth burst transfers for demanding desktop workloads.
Sustained throughput from 10000 RPM spindle
The high rotational speed maintains consistent data rates during extended read and write sessions rather than tailing off after a short burst. The built-in heat sink dissipates the extra thermal load so the drive stays within safe operating limits inside performance chassis. AF media formatting supports the areal density needed for this capacity at speed.
250GB capacity decides fit
At 250GB the drive suits operating-system installs, scratch disks or targeted application storage where latency matters more than bulk space. Buyers who need multi-terabyte archives or large media libraries will find the capacity too small for a primary data volume.
จุดเด่น
- 10,000 RPM speed for fast data access
- 64 MB cache boosts burst throughput
- 250 GB capacity stores operating system and apps
- 5-inch mechanism in 3.5-inch frame fits standard desktop bays
- built-in heat sink keeps drive cool under load
ข้อมูลจำเพาะ
ยังไม่มีข้อมูลจำเพาะที่เผยแพร่สำหรับสินค้านี้
คำถามเกี่ยวกับสินค้านี้
How much noise and heat does the 10000 RPM drive produce during continuous operation?
The 2.5 inch mechanism is enclosed in a 3.5 inch mounting frame with a built-in heat sink designed to keep the drive extra cool in high-performance desktop chassis.
What existing desktop components are required to install this SATA 6Gb/s drive?
A free 3.5 inch drive bay, a SATA data cable, and a SATA power connector from the power supply are needed for installation.
Will the SATA 6Gb/s interface work with an older motherboard that only supports SATA 3Gb/s?
Yes, the SATA 6Gb/s interface is backward compatible and will operate at the 3Gb/s speed supported by the older motherboard.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



