INITMMO 1200x300mm Magnetic Dust Filter 2-Pack Black
- INITMMO 2 x 1200*30…
- not_applicable
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Four 60mm mesh filters block up to 89% of dust while fitting standard case fans for cleaner components
The Westinghouse TSCP3666 kit supplies four 2.36 inch metal mesh covers that fit 60mm case fan openings. Each filter uses a nylon screen rated at 89 percent dust capture to keep internal components clean while maintaining airflow. The ABS resin frame is fireproof and heatproof, rated for continuous operation between -10 and +55 with IP54 ingress protection. LED illumination is integrated into the assembly for visual indication.
These covers suit builders who want a simple, reusable barrier on 60mm intake or exhaust points without adding active cooling hardware. The screw-on design uses existing fan mounting holes, though screws are not included in the package. Buyers needing finer particulate arrestance, magnetic attachment, or PWM fan control should consider alternative filter solutions that provide those specific features.
The single specification that determines suitability is the 89 percent dust-proof rating of the nylon mesh. This figure defines the balance between particle retention and airflow restriction for the 60mm form factor. If a build requires higher filtration efficiency or a different mounting pattern, this filter set will not meet that requirement.
| Brand | Westinghouse |
|---|---|
| Model | TSCP3666 |
| features | LED |
| dimensions | 14.33in W x 12.83in H x 9.06in D |
| material | Metal |
The pack contains four 60mm nylon dust-filter covers. Mounting screws are not supplied; reuse the screws already holding your case fans.
These filters are made for 60mm (2.36 inch) fan openings; they will not fit larger or smaller fan mounts.
The nylon mesh blocks up to 89% of airborne particles, keeping internal components noticeably cleaner while still allowing adequate airflow.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม