เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

WMtec

WMtec FSP300-60GLC 300W server power supply

SKU CH-SRX9-FWNE3

Delivers 300W to servers with active PFC across 100-240V input at 50/60Hz

  • Delivers 300 W for reliable server operation
  • Active PFC improves power efficiency and stability
  • Wide 100-240 V input suits global deployments
  • Supports 50/60 Hz mains for flexible installation

300W industrial server power unit

The WMtec FSP300-60GLC delivers 300 Watt maximum output for rack-mount and industrial chassis. Active power-factor correction accepts 100-240V input at 50 or 60 Hz without manual switching. It suits system integrators building compact servers or replacing failed units in existing infrastructure.

Standard ATX connector set included

Cables provide the main 24-pin, CPU and peripheral connectors required by typical server mainboards. No extra adapters or mounting brackets are supplied, so builders must verify chassis screw patterns and cable routing before installation. Buyers needing redundant or hot-swap capability should select a different form factor.

จุดเด่น

  • Delivers 300 W for reliable server operation
  • Active PFC improves power efficiency and stability
  • Wide 100-240 V input suits global deployments
  • Supports 50/60 Hz mains for flexible installation

ข้อมูลจำเพาะ

ยังไม่มีข้อมูลจำเพาะที่เผยแพร่สำหรับสินค้านี้

คำถามเกี่ยวกับสินค้านี้

How often should the internal cooling fan be cleaned or replaced to maintain airflow?

The unit draws 5 to 2 amps at 100 to 240 volts, so dust buildup on the fan intake will raise internal temperatures; plan a visual check every six months and replace the fan if bearing noise appears.

At what load does the 300 watt limit become the binding constraint during continuous operation?

Sustained draw above 300 watts will trigger the over-power protection; the supply is rated for 300 watts maximum across the 50 and 60 hertz input range.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที