Zyvpee
Zyvpee FBA08T24H 80x15mm 24V 3-pin case fan
80 mm case fan with 15 mm thickness, 24 V operation and 3-pin power connector for inverter cooling
- TypeCase Fan
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesInverter Cooling
- Dimensions80*15MM
- 80 mm frame fits standard case mounts
- 15 mm slim profile suits tight clearances
- 24 V 0.19 A three-pin power for direct PSU connection
- 17 A running current keeps draw low
- Inverter cooling design targets focused airflow
Zyvpee FBA08T24H 24V inverter case fan
This 80 by 15 millimetre case fan runs on a 24 volt supply and draws 0.17 ampere. It uses a three-pin power connector and is built for inverter cooling duties. The black frame carries no LED lighting.
Suits 24V systems with three-pin headers
Builders whose equipment provides a 24 volt fan header and accepts a three-pin connector can use this fan. Buyers whose hardware only offers a different voltage or a four-pin PWM header cannot connect it.
24 volt three-pin power specification
The fan requires a 24 volt DC source and a three-pin header; the current draw is 0.17 ampere. If the system cannot supply that exact voltage and connector combination the fan will not operate.
จุดเด่น
- 80 mm frame fits standard case mounts
- 15 mm slim profile suits tight clearances
- 24 V 0.19 A three-pin power for direct PSU connection
- 17 A running current keeps draw low
- Inverter cooling design targets focused airflow
ข้อมูลจำเพาะ
| Brand | Zyvpee |
|---|---|
| Series | FBA08T24H |
| Model | FBA08T24H |
| Type | Case Fan |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | Inverter Cooling |
| Dimensions | 80*15MM |
คำถามเกี่ยวกับสินค้านี้
How do I confirm the FBA08T24H is spinning correctly after installation?
Connect the 3-pin connector to a 24 V header and verify the fan rotates; the 0.17 A or 0.19 A current draw listed on the label should match your controller reading.
What comes with the Zyvpee 8015 fan and what must I source separately?
The box contains the 80×15 mm black non-LED case fan with its 3-wire lead; mounting screws and a 24 V power header are not included.
Which FBA08T24H variant should I choose for an 80 mm inverter cooling slot?
Select the FH6-1830 / 0K01AD-SD-01 version rated 24 V 0.17 A 3-pin; it matches the 8015 80×15 mm form factor specified for that slot.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



