Zyvpee
Zyvpee PLB05710S12HH 12V .3A 13-blade VGA fan
A 12 V, 0.3 A sleeve-bearing case fan with 13 blades and a 2-pin connector for graphics-card cooling
- TypeCPU Cooler Fan
- CompatibilityCPU Cooler
- Bearing Typesleeve bearing
- Power Connector2 Pin
- ColorBlack
- LEDNon-LED
- 12 V .3 A operation powers the fan efficiently
- 13-blade design moves air through the heatsink
- 2-pin connector fits standard VGA headers
- Sleeve bearing runs quietly at low speed
- Black non-LED finish suits stealth builds
Replacement 12 V .3 A VGA fan
This 12 V .3 A fan fits graphics-card coolers that use a two-pin power connector. The sleeve bearing keeps the unit simple and the non-LED black frame stays discreet inside the case. It serves builders who need a direct swap for a worn or noisy original cooler fan.
13-blade rotor and two-pin wiring
Thirteen blades move air through the heatsink without a PWM signal, so speed is fixed by the 12 V rail. The two-wire lead plugs straight into the existing header on the card, removing the need for adapters or soldering. This suits repairs where the original connector matches the two-pin layout.
Cooling headroom for standard GPU heatsinks
The airflow handles typical mid-range graphics-card coolers under normal gaming loads. It will not satisfy high-wattage cards that demand higher static pressure or PWM speed control. Buyers who need variable-speed operation or greater pressure should look for a PWM-equipped alternative.
จุดเด่น
- 12 V .3 A operation powers the fan efficiently
- 13-blade design moves air through the heatsink
- 2-pin connector fits standard VGA headers
- Sleeve bearing runs quietly at low speed
- Black non-LED finish suits stealth builds
ข้อมูลจำเพาะ
| Brand | Zyvpee |
|---|---|
| Series | PLB05710S12HH |
| Model | PLB05710S12HH |
| Type | CPU Cooler Fan |
| Compatibility | CPU Cooler |
| Bearing Type | sleeve bearing |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | vga fan |
| Dimensions | contact us |
| Package Contents | refer to title |
คำถามเกี่ยวกับสินค้านี้
How often will the sleeve bearing need replacement?
Sleeve bearings typically require replacement after extended use; lubrication can extend life but the fan will eventually need swapping.
What limits continuous operation first?
The 0.3 A current draw at 12 V sets the thermal limit; sustained load may cause the motor to throttle before airflow drops.
How much noise and heat does it produce running all day?
Thirteen blades moving at 12 V create a noticeable hum; the motor dissipates only the power it draws, keeping case temperature rise minimal.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



