Zyvpee
Zyvpee RFB1804 18*04mm 5V 0.25W 2-wire case fan
An 18 mm square 5 V case fan with hydraulic bearing and two-wire power for compact CPU-cooler airflow
- TypeCase Fan
- CompatibilityCPU Cooler
- Bearing TypeHydraulic
- Power Connector2 Wires
- ColorBlack
- LEDNon-LED
- Compact 18 mm frame fits tight CPU coolers
- Hydraulic bearing runs quietly at low power
- 5 V 0.25 W draw keeps energy use minimal
- Two-wire DC power simplifies wiring in small builds
- Drone-blower airflow design targets 3C component heat
Compact 1.8 cm blower for tight spaces
The Zyvpee RFB1804 is an 18 mm square, 4 mm thick case fan that runs on 5 V and draws 0.25 W through a two-wire DC connector. Its hydraulic bearing and non-LED black frame suit small-form-factor builds and 3C electronic devices where a low-profile blower is required.
Sustained low-power airflow
At a constant 5 V input the fan delivers steady airflow without the spin-up spikes seen in higher-wattage models. The hydraulic bearing maintains consistent speed during continuous operation, and the 0.25 W draw keeps heat contribution negligible inside sealed enclosures.
Two-wire DC power limit
The 2-wire interface supplies fixed-voltage power only, so speed cannot be modulated by PWM or voltage control from a motherboard header. Builders needing variable fan curves or tachometer feedback must add external circuitry, and the 5 V rail must be sourced from a compatible supply.
จุดเด่น
- Compact 18 mm frame fits tight CPU coolers
- Hydraulic bearing runs quietly at low power
- 5 V 0.25 W draw keeps energy use minimal
- Two-wire DC power simplifies wiring in small builds
- Drone-blower airflow design targets 3C component heat
ข้อมูลจำเพาะ
| Series | RFB1804 |
|---|---|
| Model | RFB1804 |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Hydraulic |
| Power Connector | 2 Wires |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 18*04mm |
คำถามเกี่ยวกับสินค้านี้
How loud and warm does the 18 mm RFB1804 get when running continuously at 5 V?
The fan draws 0.25 W from a 5 V supply, so heat output is very low; with a hydraulic bearing it runs quietly enough for always-on cooling in small enclosures.
What power source must I already have to run this 2-wire blower?
You need a 5 V DC supply that can deliver at least 0.25 W and a 2-pin header or solder points matching the fan’s two wires.
Will the 1.8 cm square frame line up with the mounting points on my older CPU cooler?
The fan measures 18 mm by 4 mm overall; check your cooler’s hole spacing against those dimensions before installing.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



