Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Square grey thermal pad, 120 by 120 millimetres, point five millimetres thick

Lirealar

Lirealar 120x120mm thermal pad 12.8 W/mK 0.5mm 15g

SKU CH-TRTV-VNJQ4 MPN 120x120mm

Silicone thermal pad measuring 120 x 120 x 0.5 mm with 12.8 W/mK conductivity for CPU, GPU and heatsink gap filling

  • Volume / Net Weight15g
  • Thermal Conductivity12.8 W/mK,
  • Long Term Operating Temperature-40 C to +400C
  • SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/c
  • FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi

Type Thermal Pad

Model 120x120mm

Specification 0.5mm

1 yapılandırma daha gösterin
  • High 12.8 W/mK conductivity moves heat efficiently
  • Non-conductive insulation prevents electrical shorts on components
  • Operates from -40 °C to 200 °C for wide temperature stability
  • Compressible 0.5 mm pad fills uneven gaps between surfaces
  • Reusable non-curing material allows easy re-assembly

Thermal pad for component cooling

This thermal pad sits between a heat-generating component and its heatsink to improve heat transfer. The silicone-based material fills microscopic gaps and uneven surfaces that would otherwise trap air. It is designed for use on desktop and laptop GPUs, CPUs, LED modules and other electronics requiring a compliant interface.

Builders needing a 12.8 W/mK 0.5mm pad

The pad suits repairs or upgrades where a 120mm square sheet of 0.5mm thickness matches the component stack height. It is not suitable for assemblies that require a thicker or thinner gap filler, nor for applications demanding a higher thermal conductivity rating than 12.8 W/mK.

12.8 W/mK thermal conductivity rating

This figure determines how effectively the pad moves heat across the interface. The material also withstands long-term operating temperatures from -40°C to 200°C and provides electrical insulation with a breakdown voltage above 9.8KV at 1mm thickness.

Öne çıkanlar

  • High 12.8 W/mK conductivity moves heat efficiently
  • Non-conductive insulation prevents electrical shorts on components
  • Operates from -40 °C to 200 °C for wide temperature stability
  • Compressible 0.5 mm pad fills uneven gaps between surfaces
  • Reusable non-curing material allows easy re-assembly

Teknik özellikler

SeriesThermal Pad
Model120x120x0.5mm
Volume / Net Weight15g
Thermal Conductivity12.8 W/mK,
Long Term Operating Temperature-40 C to +400C
SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/cc Hardness:30-55(Sc) Breakdown Voltage:>9.8KV(1mm) Temperature Range:-40°C~200°C
FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi One Pad , multi-purpose, durable,insulated, non-conductive lnsulation does not conduct electricity and is safe for use Natural viscosity, easy to assemble and reusable

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

What gap thickness does the 0.5 mm pad fill between a heatsink and component?

The pad is 0.5 mm thick and compresses to bridge uneven surfaces and air gaps between the heat source and heatsink.

How do I install the 120x120 mm pad without tearing the silicone sheet?

Cut the 120x120 mm sheet to size, peel the protective film, place it on the clean component, then press the heatsink down evenly so the natural viscosity spreads the pad.

When should I replace the 15 g thermal pad after long-term use?

The non-curing silicone stays pliable from -40 °C to 200 °C; replace it only if the pad dries out, tears, or thermal performance drops after repeated disassembly.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.