Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Square grey thermal pad, 120 by 120 millimetres, point five millimetres thick

Lirealar

Lirealar 120x120mm thermal pad 12.8 W/mK 0.5mm 15g

SKU CH-TRTV-VNJQ4 MPN 120x120mm

Silicone thermal pad measuring 120 x 120 x 0.5 mm with 12.8 W/mK conductivity for CPU, GPU and heatsink gap filling

  • Volume / Net Weight15g
  • Thermal Conductivity12.8 W/mK,
  • Long Term Operating Temperature-40 C to +400C
  • SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/c
  • FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi

Type Thermal Pad

Model 120x120mm

Specification 0.5mm

Vedeți celelalte 1 configurații
  • High 12.8 W/mK conductivity moves heat efficiently
  • Non-conductive insulation prevents electrical shorts on components
  • Operates from -40 °C to 200 °C for wide temperature stability
  • Compressible 0.5 mm pad fills uneven gaps between surfaces
  • Reusable non-curing material allows easy re-assembly

Thermal pad for component cooling

This thermal pad sits between a heat-generating component and its heatsink to improve heat transfer. The silicone-based material fills microscopic gaps and uneven surfaces that would otherwise trap air. It is designed for use on desktop and laptop GPUs, CPUs, LED modules and other electronics requiring a compliant interface.

Builders needing a 12.8 W/mK 0.5mm pad

The pad suits repairs or upgrades where a 120mm square sheet of 0.5mm thickness matches the component stack height. It is not suitable for assemblies that require a thicker or thinner gap filler, nor for applications demanding a higher thermal conductivity rating than 12.8 W/mK.

12.8 W/mK thermal conductivity rating

This figure determines how effectively the pad moves heat across the interface. The material also withstands long-term operating temperatures from -40°C to 200°C and provides electrical insulation with a breakdown voltage above 9.8KV at 1mm thickness.

Puncte forte

  • High 12.8 W/mK conductivity moves heat efficiently
  • Non-conductive insulation prevents electrical shorts on components
  • Operates from -40 °C to 200 °C for wide temperature stability
  • Compressible 0.5 mm pad fills uneven gaps between surfaces
  • Reusable non-curing material allows easy re-assembly

Specificații

SeriesThermal Pad
Model120x120x0.5mm
Volume / Net Weight15g
Thermal Conductivity12.8 W/mK,
Long Term Operating Temperature-40 C to +400C
SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/cc Hardness:30-55(Sc) Breakdown Voltage:>9.8KV(1mm) Temperature Range:-40°C~200°C
FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi One Pad , multi-purpose, durable,insulated, non-conductive lnsulation does not conduct electricity and is safe for use Natural viscosity, easy to assemble and reusable

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What gap thickness does the 0.5 mm pad fill between a heatsink and component?

The pad is 0.5 mm thick and compresses to bridge uneven surfaces and air gaps between the heat source and heatsink.

How do I install the 120x120 mm pad without tearing the silicone sheet?

Cut the 120x120 mm sheet to size, peel the protective film, place it on the clean component, then press the heatsink down evenly so the natural viscosity spreads the pad.

When should I replace the 15 g thermal pad after long-term use?

The non-curing silicone stays pliable from -40 °C to 200 °C; replace it only if the pad dries out, tears, or thermal performance drops after repeated disassembly.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.