10Gtek LC-LC OM3 Duplex 50/125 LSZH 3-Meter (9.8ft) Fibre Optic Cable
- Fiber
- 1 Pack
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
10Gtek
Duplex OM3 multimode patch cord with LC connectors, 50/125 µm core, LSZH jacket, 3.28 ft length, tested to 0.3 dB insertion loss and 35 dB return loss
This 10Gtek fiber optic cable provides a duplex LC to LC connection for multimode networks. It uses OM3 50/125 micron bend-insensitive fiber with a 2.0 mm LSZH jacket. The 3.28 ft length suits short-range links between SFP transceivers. Ceramic ferrules with PC polish ensure reliable mating.
As a passive fiber optic cable, this product generates no heat and draws no electrical power. It operates silently without fans or active components. The LSZH jacket material meets UL 910 fire safety standards for low smoke and zero halogen emissions. Insertion loss is tested at 0.3 dB maximum for multimode performance.
The cable ships as a single 1 pack unit with no additional accessories or software included. It is compliant with TIA/EIA 568-C.3, 604-10, 492AAAA, IEC 60793-2-10 A1b, CE and RoHS standards. The 14 year ISO certified manufacturer performs 100% insertion loss and return loss testing at 35 dB. Aramid yarn inside the cable adds tensile strength for durable installations.
| Brand | 10Gtek |
|---|---|
| Type | 1 Pack |
| Color | 1 Pack |
| Length | 3.28 ft. |
| Connector Number | 2 |
| Connector Detail | lc to lc |
| Speed | 10g |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Align the keyed LC duplex plug with the SFP port, push until the latch clicks, then pull gently to confirm it is locked — skipping the pull-check is the step most often missed.
Inspect the ceramic ferrules for dust before every reconnect; clean with a lint-free wipe and isopropyl alcohol if contaminated, and replace the cord if insertion loss rises above the tested 0.3 dB.
The 0.3 dB insertion-loss budget is the first constraint; modal dispersion at 850 nm over longer runs would limit bandwidth, but at this length the tested loss margin is the governing factor.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟