نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

A-Tech

A-Tech 128GB (4x32GB) DDR3 1333 ECC RDIMM 4Rx4 1.5V Server RAM

SKU CH-QGM7-2SV29

A 128 GB quad-channel kit of four 32 GB DDR3 1333 ECC registered DIMMs for compatible servers and workstations

  • Capacity128GB (4 x 32GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 128GB (4 x 32GB)

  • 128 GB total capacity from four 32 GB modules for large workloads
  • DDR3 1333 MHz (PC3-10600R) speed matches server specifications
  • ECC registered design detects and corrects data errors automatically
  • Quad-rank 4Rx4 organisation maximises density per DIMM slot
  • 5 V standard DDR3 voltage ensures broad platform compatibility

Server DDR3 kit for registered ECC workloads

This A-Tech kit delivers 128 GB of DDR3 1333 memory in four 32 GB registered ECC modules. It is built for servers and workstations that require quad-rank x4 RDIMMs and will not function in desktop or laptop systems. The modules operate at standard 1.5 V with CL9 latency.

Capacity headroom with 32 GB quad-rank modules

Each 32 GB 4Rx4 module provides high density for multi-socket platforms that support registered DDR3, allowing large virtualisation or database workloads to fit in fewer slots. Systems limited to lower-rank or unbuffered memory cannot use these modules, and total capacity is capped at the platform's registered DIMM limit.

Matched quad-channel kit simplifies deployment

The four modules are factory-matched and tested together, ensuring consistent timing across all channels without manual binning. No additional software or accessories are included; the value is in the verified compatibility and lifetime warranty backing the kit.

أبرز المميزات

  • 128 GB total capacity from four 32 GB modules for large workloads
  • DDR3 1333 MHz (PC3-10600R) speed matches server specifications
  • ECC registered design detects and corrects data errors automatically
  • Quad-rank 4Rx4 organisation maximises density per DIMM slot
  • 5 V standard DDR3 voltage ensures broad platform compatibility

المواصفات

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 32GB 4Rx4 PC3-10600R
Capacity128GB (4 x 32GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will these 1333 MHz DDR3 RDIMMs run reliably alongside slower DDR3 modules I already have installed?

The kit runs at 1333 MHz CL9; if mixed with slower DDR3 the system will clock all modules to the lowest speed and loosest timings present.

How can I confirm the 128 GB quad-channel kit is recognised and ECC is active after installation?

Check POST memory count, then verify 128 GB and ECC status in BIOS/UEFI or with dmidecode / lsmem showing registered DDR3 1333 operation.

Does the 240-pin 4Rx4 kit include any cables, brackets or software, or is it only the four 32 GB modules?

Only the four 32 GB DDR3 1333 ECC registered DIMMs are supplied; no cables, brackets or software are included.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.