نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Eight green DDR3 DIMMs with black chips and silver contacts

A-Tech

A-Tech 128GB (8x16GB) DDR3 1600 ECC RDIMM 2Rx4 1.5V 240-Pin Server RAM

SKU CH-FHPG-FYG89

Eight 16 GB DDR3 1600 registered ECC DIMMs provide 128 GB at CL11 1.5 V for servers and workstations

  • Capacity128GB (8 x 16GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 128GB (8 x 16GB)

Speed DDR3 1600 (PC3 12800)

  • Massive 128GB capacity handles heavy server workloads with eight 16GB modules
  • ECC registered design detects and corrects data errors for reliable uptime
  • DDR3 1600 speed at CL11 latency delivers responsive performance for demanding applications
  • Standard 1.5V operation ensures broad compatibility with DDR3 server platforms
  • 240-pin dual-rank x4 configuration optimises density for multi-socket workstations

Server Memory Kit

This 128GB kit contains eight 16GB registered DIMMs built for DDR3 servers and workstations. Each module runs at 1600 MHz with CL11 latency and 1.5V standard voltage. ECC and registered buffering protect data integrity in multi-socket platforms. The dual-rank x4 organisation suits high-capacity configurations.

Sustained Workload Behaviour

Registered buffering reduces electrical load on the memory controller during continuous operation. ECC corrects single-bit errors without halting the system. Dual-rank x4 density keeps all channels populated while maintaining signal quality. Standard 1.5V operation avoids the thermal stress of higher-voltage modules.

DDR3 Interface Limits

The 240-pin DDR3 interface caps transfer rates at PC3-12800 bandwidth. Registered DIMMs cannot be mixed with unbuffered modules in the same system. Desktop and laptop platforms lack the required registered memory controller. Maximum capacity depends on the server's memory controller and slot count.

أبرز المميزات

  • Massive 128GB capacity handles heavy server workloads with eight 16GB modules
  • ECC registered design detects and corrects data errors for reliable uptime
  • DDR3 1600 speed at CL11 latency delivers responsive performance for demanding applications
  • Standard 1.5V operation ensures broad compatibility with DDR3 server platforms
  • 240-pin dual-rank x4 configuration optimises density for multi-socket workstations

المواصفات

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 16GB 2Rx4 PC3-12800R
Capacity128GB (8 x 16GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How much power does the 1.5V DDR3 1600 kit draw when the server runs all day?

Each module operates at the standard DDR3 voltage of 1.5V; total system power depends on the platform and how many of the eight 16GB sticks are populated.

What must the motherboard provide for these 240-pin registered DIMMs to function?

The board needs DDR3 RDIMM slots that accept 2Rx4 modules at 1600 MHz with ECC support; desktop or laptop boards will not work.

Can I mix these CL11 1600 registered modules with slower DDR3 registered sticks already in the system?

The kit runs at 1600 MHz CL11; the memory controller will set the common speed to the slowest installed module, so older sticks will set the pace.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.