OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
16 GB DDR4 2933 MHz ECC registered DIMM with CL21 latency and 1.20 V operation
This 16GB DDR4 module runs at 2933MHz with CL21 latency and 1.20V operation. It is a registered DIMM with ECC and a 2Rx8 organisation, built for server and workstation platforms that require error-correcting registered memory. The 288-pin form factor matches standard DDR4 DIMM slots in compatible systems.
Registered DIMMs add a clock cycle of buffering, so the memory controller must support registered operation and the specific 2933MHz data rate. Mixing registered with unbuffered modules will prevent boot, and populating all slots may force the controller to drop below the rated speed. Verify the platform’s qualified vendor list before installation.
The module uses major-brand DRAM components assembled to a standard 288-pin registered DIMM PCB. Gold-edge contacts resist oxidation in continuously powered racks, and the registered buffer reduces electrical load on the memory bus. The single-module 16GB capacity lets you fill slots incrementally without exceeding per-channel rank limits.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This module provides 16GB in a single 2Rx8 registered DIMM; select it when your system requires one 16GB stick at DDR4 2933MHz with ECC and registered buffering.
The module runs at 2933MHz with CL21 latency at 1.20V, providing ECC error correction and registered signal buffering for stable operation in compatible server and workstation platforms.
The 288-pin registered DIMM form factor operates at the DDR4 2933MHz standard with CL21 timing and 1.20V; maximum throughput is determined by the platform's memory controller and channel population.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟