نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

A-Tech

A-Tech 16GB DDR5 6400 ECC RDIMM 1Rx8 288-Pin Server Memory

SKU CH-AZQW-WCB44

16 GB DDR5 6400 ECC RDIMM module with 1Rx8 registered design for server workloads

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS Latency32
  • Voltage1.10V
  • ECCYes
  • 16 GB DDR5 6400 boosts server throughput
  • ECC RDIMM detects and corrects data errors
  • 1Rx8 rank fits dense memory configurations
  • 10 V operation reduces power draw
  • 288-pin DDR5 form factor installs in standard slots

Server ECC RDIMM for workstations

This A-Tech 16GB DDR5 6400 ECC RDIMM is a registered server memory module designed for compatible workstation and server platforms. It uses a 1Rx8 organisation with major-brand DRAM ICs and operates at the standard DDR5 voltage of 1.10V. The module serves as a direct replacement for Hynix HMCG78AHBRA and HMCG78AHBRA477N part numbers.

Simple DIMM installation with manual guidance

Installation follows the standard 288-pin DDR5 DIMM procedure: align the notch, press firmly until the retention clips engage, and ensure the module seats evenly. The supplier advises consulting your system manual for proper memory seating and channel population rules, as incorrect slot order is the most common cause of boot failure or reduced performance.

Verify platform support for registered ECC DDR5

Before ordering, confirm that your motherboard and CPU support DDR5 RDIMM modules with ECC and registered buffering, as standard consumer desktop platforms typically do not accept this memory type. Check the qualified vendor list or system documentation for 1Rx8 16GB module compatibility and maximum supported speed to match the 6400 MT/s rating.

أبرز المميزات

  • 16 GB DDR5 6400 boosts server throughput
  • ECC RDIMM detects and corrects data errors
  • 1Rx8 rank fits dense memory configurations
  • 10 V operation reduces power draw
  • 288-pin DDR5 form factor installs in standard slots

المواصفات

BrandA-Tech
SeriesCompatible Replacement for Hynix HMCG78AHBRA HMCG78AHBRA477N
ModelA-Tech 16GB DDR5-6400 ECC RDIMM Server RAM Module
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS Latency32
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

أسئلة حول هذا المنتج

How can I verify the A-Tech 16GB DDR5 6400 ECC RDIMM is running at the correct 6400 speed and CL32 latency after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 6400 MT/s with CAS latency 32; the module operates at the standard 1.10 V, so no manual voltage adjustment is needed.

What is included with the A-Tech 16GB DDR5 6400 ECC RDIMM and do I need any extra parts such as a heat spreader?

The box contains a single 16 GB 288-pin DDR5 RDIMM built with major-brand DRAM ICs; no heat spreader is fitted or required, and no additional cables or brackets are necessary for installation.

Which capacity and rank option should I choose if my server manual specifies 1Rx8 registered ECC modules at 6400 MT/s?

This module provides exactly 16 GB in a 1Rx8 organisation with ECC RDIMM registration, matching the 6400 MT/s PC5-51200 specification your manual calls for.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.