EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
24 GB DDR3 1066 ECC registered RDIMM kit for early Mac Pro and Xserve models
This 24GB kit contains three 8GB DDR3 1066 ECC registered DIMMs built for select Apple Mac Pro and Xserve models. The modules run at 1.50V and use major-brand chips validated for Mac systems. Each stick is a 240-pin RDIMM rated PC3-8500 with 2Rx4 organisation. The kit targets owners of compatible Mac Pro towers from 2009 to 2012 and Early 2009 Xserve units.
The memory fits Mac Pro models identified as MacPro4,1 and MacPro5,1 plus Xserve3,1, covering order numbers MB449LL/A, MB535LL/A, MB871LL/A, MC250LL/A, MC560LL/A, MC915LL/A, MC561LL/A, MD770LL/A and MD772LL/A. Buyers with later Mac Pro designs, iMac, MacBook or any non-Apple platform cannot use these registered DIMMs. Systems requiring unbuffered memory or a different DDR generation must look elsewhere.
The decisive specification is the DDR3 1066 (PC3-8500) ECC registered interface; the Mac Pro and Xserve memory controllers only accept this exact speed and signalling. Installing faster, slower or unbuffered modules will prevent boot or cause errors. Verify your model ID matches MacPro4,1, MacPro5,1 or Xserve3,1 before purchasing.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Apple Mac RAM Memory Upgrades |
| Capacity | 24GB (3 x 8GB) |
| Speed | DDR3 1066 (PC3 8500) |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major Brand Chipset |
| Compatible System | Apple Mac Systems |
| Features | Major Brand Chips |
Each 8 GB module operates at 1.50 V DDR3 standard voltage; total system draw depends on the Mac Pro's memory controller and workload, not on the kit alone.
A compatible Mac Pro (Early 2009, Mid 2010 or Mid 2012, 4-core or 8-core) or Xserve (Early 2009) with free DDR3 RDIMM slots and a supported Xeon processor.
Yes, the kit is DDR3 1066/1067 MHz PC3-8500 ECC RDIMM, matching the factory speed and registered ECC specification of the supported Mac Pro and Xserve models.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟