A-Tech 16GB (4x4GB) DDR3 1600 ECC UDIMM 1Rx8 1.5V Server RAM
- 16GB (4 x 4GB)
- DDR3 1600 (PC3 1280…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
A-Tech
Eight-module 32 GB DDR3L 1333 ECC unbuffered kit for servers and workstations
Capacity 32GB (8 x 4GB)
Speed DDR3L 1333 (PC3L 10600)
This 32GB kit contains eight 4GB DDR3L 1333 ECC UDIMM modules running at 1.35V with CL9 latency and 2Rx8 dual-rank organisation. It is built for servers and workstations that accept 240-pin unbuffered ECC memory and need a high-density, low-voltage memory fill.
The modules are validated only for DDR3 server and workstation platforms that support ECC unbuffered DIMMs; they will not work in standard desktop or laptop systems. Buyers who need registered or load-reduced ECC, different rank configurations, or higher speeds should look at other memory lines.
Each module uses a 2Rx8 dual-rank x8 layout, which affects how many ranks the memory controller sees per channel and can limit the total number of modules a platform supports. Verify the system's maximum rank-per-channel and slot-count limits before ordering to ensure the eight-module kit will be fully recognised.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 4GB 2Rx8 PC3L-10600E |
| Capacity | 32GB (8 x 4GB) |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
They run at 1.35 V and can also operate at 1.5 V if the server requires standard DDR3 voltage, so no hardware change is needed.
The DDR3L 1333 bus and CL9 latency set the maximum bandwidth ceiling during continuous workloads.
Each module runs at low 1.35 V DDR3L voltage, keeping total power draw and heat output modest for 24/7 server operation.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟