A-Tech
A-Tech 32GB DDR3 1066MHz ECC RDIMM 4Rx4 Server Memory
32 GB DDR3 1066 MHz ECC registered DIMM with 4Rx4 organisation for HP server upgrades
- Capacity32GB
- SpeedDDR3 1066 (PC3 8500)
- CAS LatencyCL7
- Voltage1.50V
- ECCYes
- Buffered/RegisteredRegistered
- 32 GB capacity handles heavy server workloads
- DDR3 1066 MHz speed accelerates data throughput
- ECC RDIMM design detects and corrects memory errors
- 240-pin registered form factor fits compatible HP systems
- 5 V standard voltage ensures stable operation
32GB DDR3 1066MHz ECC Registered DIMM
This 32GB DDR3 module runs at 1066MHz (PC3-8500) with CL7 latency and 1.50V operation. It is an ECC registered DIMM built in a 4Rx4 configuration using major-brand chips on a 240-pin form factor. The module is a compatible replacement for HP part numbers 627814-B21, 628975-081 and 632205-001.
Server administrators expanding memory
This module suits IT teams upgrading or repairing compatible HP servers and workstations that accept DDR3 1066MHz ECC registered DIMMs. It is not for desktop PCs or consumer laptops that require unbuffered non-ECC memory. Buyers whose systems need a different DDR3 speed, a different rank layout, or a different voltage should verify the platform specification before ordering.
4Rx4 rank organisation determines slot population
The 4Rx4 rank structure counts as four logical ranks per module, which affects how many DIMMs the memory controller can address per channel. Check the server documentation for maximum supported ranks per channel and total system capacity to ensure this 32GB module fits the allowed configuration.
أبرز المميزات
- 32 GB capacity handles heavy server workloads
- DDR3 1066 MHz speed accelerates data throughput
- ECC RDIMM design detects and corrects memory errors
- 240-pin registered form factor fits compatible HP systems
- 5 V standard voltage ensures stable operation
المواصفات
| Brand | A-Tech |
|---|---|
| Capacity | 32GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
أسئلة حول هذا المنتج
Does my server need a 240-pin DDR3 DIMM slot to accept this 32GB registered module?
Yes, this is a 240-pin DDR3 DIMM running at 1066 MHz (PC3-8500) with 1.5 V registered ECC; your motherboard must provide a matching DDR3 RDIMM slot.
Can I mix this 4Rx4 32GB stick with existing 1Rx4 or 2Rx4 DDR3-1066 modules in the same channel?
Mixing ranks is possible if the platform supports 4Rx4 modules, but the memory controller will run all modules at the lowest common speed and voltage; check the system manual for maximum rank-per-channel limits.
How can I confirm the module is detected at 32 GB with ECC active after installation?
Enter the BIOS or run a hardware-inventory tool such as dmidecode; it should report a single 32 GB DDR3-1066 registered ECC DIMM at 1.5 V with the correct part number.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.



